Jump to content
SAU Community

Recommended Posts

Hey guys, just finished my r31 rb20det conversion. 90% complete just needs the rear bar replaced and the bonnet dropped down bout 2cm. besides that its all done. finished the fmic yesterday took 14 hours to mount and pipe it. good thing bout it all, the whole job fmic conversion and all was done in the back yard, so here some pics, tell me what you think, honesty appreciated

The Front mount and all piping came from The Intercooler Guy, and its bloody good, its a r32 fmic kit and it fit straight onto my r31 with almost no mods at all, so if there is any r31 guys out there, check him out hes been the best bloke by far for this stuff. by the time the air gets thru the cooler its bloody cold. made my car run sweet

Link to comment
https://www.sau.com.au/forums/topic/39430-my-converted-rb20det-r31-pics/
Share on other sites

Nice R31.  :aroused:  

Does it feel alot different to the RB30E?

yeah feels sooooo good compared to the rb30, not as much lower end but from 3 grand up about 30 times the fun hehe, couldnt lay a 10m long black line on the road starting at 50kmhr with the rb30

No the kit wasnt custom made, just order the r32 kit it fits sweeeeet!!!

like no noticeble lag on this cooler either AND not a single bit of pressure drop, holds 11psi perfect the whole rev range

yeah feels sooooo good compared to the rb30, not as much lower end but from 3 grand up about 30 times the fun hehe, couldnt lay a 10m long black line on the road starting at 50kmhr with the rb30

No the kit wasnt custom made, just order the r32 kit it fits sweeeeet!!!

like no noticeble lag on this cooler either AND not a single bit of pressure drop, holds 11psi perfect the whole rev range

Nice to know, i'm thinking of a rb25 for my r31 once the r30 is finished, good to know i dont have to get custom piping again! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...