Jump to content
SAU Community

Recommended Posts

Im having issues with my volts, on my turbo timer it shows the voltage and on a charged battery its like high 13v or else it sits on 13.1- 13.3 at max. is there any way i get make it have a higher voltage and more constant? and when i turn window heater on and fan it drops to 12.7/8 and my car struggles to idle or even drive as its just popping heaps. Also when i drive its just constantly like popping or just cant cruise at any speeds without it like gurgling and spluttering. any ides?

one last thing haha when my car idles i have this faint ticking noise on the engine and then when I put my foot down i gets loud, usually after boost kick in.any ideas on these issue?

thanks heaps in advance :D

Link to comment
https://www.sau.com.au/forums/topic/394354-mechanical-and-electrical-issues/
Share on other sites

check belt tension and battery condition/voltage.get ur mate to check voltage drop.the ticking noise could be a wrongly installed spark plug or faulty coil pack.by the sounds of the way its performing i would be checking those things first.

My voltage will sit around 13.1-13.4v (idle) and I don't have any problems, but I've never seen it dip into 12.x before.

It may be worth cleaning out the AAC valve (R32s it's not as easy to do as later generations), since when the heater or aircon is turned on, the ECU will compensate by opening up the AAC to let more air in.

Sounds like the ticking is gasket related. Back when I didn't know much about skylines, my car had a ticking sound which drove me insane. It was the injectors and its normal.

Ticking isn't bad, a knocking sound is always a concern.

check belt tension and battery condition/voltage.get ur mate to check voltage drop.the ticking noise could be a wrongly installed spark plug or faulty coil pack.by the sounds of the way its performing i would be checking those things first.

yer ill get him to have a look at a few things includeing those and see.plugs are a bitch to get to but ill check it.

My voltage will sit around 13.1-13.4v (idle) and I don't have any problems, but I've never seen it dip into 12.x before.

It may be worth cleaning out the AAC valve (R32s it's not as easy to do as later generations), since when the heater or aircon is turned on, the ECU will compensate by opening up the AAC to let more air in.

Yer when it drops it cant hold any idle, but ill check the ACC

Ticking sound could be leaking turbo gasket.

is there any easy way to figure out if it is?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...