Jump to content
SAU Community

Recommended Posts

Sorry for the newb question

but could some one give me a simple diagram (like xxxx > xxxx . xxxx etc)

on what happens when you boost

like where it goes from the turbo with specific reference to fmic and bov (which where my boost guage is connected)

got a boost leak

if i can understand this it will prob put in right place to look

thanks

Link to comment
https://www.sau.com.au/forums/topic/394511-how-boost-works/
Share on other sites

So what ur saying is-

U want to know how to find a boost leak ?

U want to know how a turbo works ?

U want to know the routing of R33 intercooler pipes ?

Also u mentioned a BOV, if its an atmo one dont bother. It Will only cause u idle and fuel economy issues. Stick with the stock one.

Link to comment
https://www.sau.com.au/forums/topic/394511-how-boost-works/#findComment-6271426
Share on other sites

hahaha but those pages dont seem to answer my question

and want it more answered towards a r33 style turbo set up

not some home made science project

please read the question before posting thanks (not just the post)

Oh, well in that case, let's start with this:

My link

After you've read that, then read Messiah's post, then refer back to my first link. After all, can't run before we can walk ;)

Link to comment
https://www.sau.com.au/forums/topic/394511-how-boost-works/#findComment-6271444
Share on other sites

URM OK

THOUGHT THE REPLIES WOULD BE LOT MORE USEFUL

HANALDO WHICH ONE OF THOSE GOOGLE RESULTS ANSWER MY QUESTION?

AS I CANT REALLY FIND WT I ASKED IN OP

OK WHAT I WANT TO KNOW IS WHERE THE BOOST (AIR) FLOWS FROM THE TURBO?

ORIGINALLY HAD A BOOST LEAK BUT I KNOW IT WAS COMING TO THE BOV (AS THE BOOST GUAGE IS CONNECTED AROUND THERE AND I DID HAVE FULL BOOST READING)

I DID LOOK INSIDE AND SAW THE FMIC JOINING AT THE FRONT WAS DODGY (SILICON JOINERS ANID CLAMPS), REMOVED THEM AND REALISED I CANT PUT IT BACK ON WITHOUT REMOVING HALF OF THE INTERCOOLER PIPING (WHICH I WILL DO LATER)

NOW I HAVE NO BOOST BUT IM HOPING ITS JUST BECAUSE EVERYTHINGS LOST AROUND THE INTERCOOLER

SO THE REASON I ASKED IS SO I CAN KNOW WHERE THE POSSIBILITIES ARE IF ITS COMING BETWEEN THE BOV AND ENGINE

AND JUST TO MAKE SURE THE FMIC COMES BEFORE BOV, OR MAYBE I HAVE ANOTHER PROBLEM

IF YOU CANT HELP ME WITH THIS OR ANSWER MY ORIGINAL POST, DONT REPLY

I KNOW HOW TO USE GOOGLE

NO NEED FOR SMART ASS COMMENTS (YES I KNOW I POSTED EVERYTHING IN CAPITALS - HOPEFULLY YOU CAN READ IT CAREFULLY BEFORE REPLYING)

Link to comment
https://www.sau.com.au/forums/topic/394511-how-boost-works/#findComment-6271495
Share on other sites

I think i know what ur getting at, u wanna know which is the outlet pipe off the turbo ? Look at ur engine from the front, u will see a big cross over pipe and a pipe connected to it, now look below that pipe and u will see another one that sorta runs parralel. Thats where the boost comes from, the lower one of the pipes, if u follow it back to the turbo u will see a 90degree elbow, thats ur outlet from the turbo.

Link to comment
https://www.sau.com.au/forums/topic/394511-how-boost-works/#findComment-6271535
Share on other sites

(YES I KNOW I POSTED EVERYTHING IN CAPITALS - HOPEFULLY YOU CAN READ IT CAREFULLY BEFORE REPLYING)

Nope, now I can't read it at all. I read this part. And now my reply is probably pretty useless, because I doubt the rest of your post was in relation to your ill-use of caps lock.

Honestly mate, my first post was helping you. If you don't understand how these things work then you're not going to be able to find and fix problems. It seems pretty clear to me that you don't understand because you are asking a question of something so simple. So do us, and yourself, a favour by reading about how these things work. A Skyline isn't inherently different from any other turbocharged/intercooled engine.

Link to comment
https://www.sau.com.au/forums/topic/394511-how-boost-works/#findComment-6271672
Share on other sites

At risk of feeding a very hungry troll...

turbo_diagram.jpg

it should be pretty simple to relate which pipes go to where.

start at your air filter, follow it back to the turbo, air goes in there. gets compressed then leaves the compressor housing (silver bit) then through to the intercooler, cools its shit down, then up and around past the BOV and to the throttle body -> engine.

p.s. i found that pic in 3 clicks and 11 key strokes...

Link to comment
https://www.sau.com.au/forums/topic/394511-how-boost-works/#findComment-6271756
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...