Jump to content
SAU Community

Recommended Posts

Hi guys

I just purchased some rims which I will be looking to include on my current car policy to have insured.

Just wondering if there are any types of wheel lock nuts that are approved/preferred by insurance companies (like alarms)

Hoping some night owls will be up to provide input.. ill be calling shannons tomorrow to ask anyway.

Thanks

Karl

Link to comment
https://www.sau.com.au/forums/topic/394527-wheel-security-lock-nuts/
Share on other sites

FYI - Just spoke with my insurance co. And they said there werent any security requirement in terms of types of lock nuts to be used.

Additionally, there was no increase to my policy with the wheels covered.

now all I need are lock nuts. Someone mentioned McGards?

the cheapest ones?? your insurance is covering them.

if you pay for expensive ones, and someone tries to steal your rims and succeeds then you would make a claim... if they fail, they are going to do damage to the rims/lock nuts in the process.. you would then make a claim to your insurance company irrespective.

however, i would get it in writing from the insurer that there are no requirements to fit lock nuts to comply with your policy..

I hate lock nuts, the key will sit in your glove box rattling around till its time to remove your wheel, then it will magic itself lost.

And if some one steals your car they will get the key out of the glove box, ashtray, wheel well.

I hate lock nuts, the key will sit in your glove box rattling around till its time to remove your wheel, then it will magic itself lost.

And if some one steals your car they will get the key out of the glove box, ashtray, wheel well.

This man speakith the truth!

I just recently lost my key. But interestingly enough, a 20mm socket fit perfectly over my 19mm locknut and undid them without damaging anything. Hows that for security!

Just replaced them with a set of Nutsac black nuts. Cheap, and work.

the cheapest ones?? your insurance is covering them.

if you pay for expensive ones, and someone tries to steal your rims and succeeds then you would make a claim... if they fail, they are going to do damage to the rims/lock nuts in the process.. you would then make a claim to your insurance company irrespective.

however, i would get it in writing from the insurer that there are no requirements to fit lock nuts to comply with your policy..

Thanks for all your input.

I ended up buying a cheaper set of lock nuts, and as above, if they end your taking the rims without the immobilizer going off, the floodlight waking up the house and my 3 dogs nOt detecting them..then they probably deserve it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...