Jump to content
SAU Community

Recommended Posts

hey didnt know where to post this so i gathered here was the right spot. im looking at buying a GQ patrol diesel. i have searched the 4x4 forums with no luck. however my question is how good/ reliable is the nissan RD28 turbo diesel and is it good offroad etc.

Link to comment
https://www.sau.com.au/forums/topic/394655-nissan-rd28-turbo-diesel/
Share on other sites

^some of the older GQ's did come out with a RB30, hard to find as they were not popular at the time. problem is they are 2.5 ton plus so need to work and rev the rb30 hard to make it work, better of with a big turbo diesel and go from there, massive torque low revs

^some of the older GQ's did come out with a RB30, hard to find as they were not popular at the time. problem is they are 2.5 ton plus so need to work and rev the rb30 hard to make it work, better of with a big turbo diesel and go from there, massive torque low revs

I've seen some people put RB25DET, RB25/30DET witha massive snail attached - no issues with a "lack" of torque.

Rather amusing watching watching all 4 mud tires turning into smoke.

^^ wise move. if you find another 2.8 or 3L you will be looking at about 6K for the 4.2 change over gearbox and engine if you want to go that way. which is probably cheaper than trying to find a good 4.2 staight away. look for a good body rather than engine

  • 1 month later...

Had a 4.2 on LPG, now have a 4.5, I could not recommend one highly enough!! Compare some prices, compare what you get for the $$s, I got a 98 Gu st, with 240k lift kit, steel bar, driving lights, electric brakes snorkel etc for $13500. Gas is pretty pricey in bathurst, and off $85 I get 500k going back and forward to work. Too many people get caught up thinking that the td is the only one to buy, and pay twice the price of an LPG powered one. Use 1/4 of what you saved chucking a 3071 on it, and it will blow a td away

That's interesting v8tzr. Could you give me a heads up about an SD33 non turbo. I bought my Dad's old 85 MQ Patrol off him about four years ago - he had it since new. It has now clocked 270,000 on the clock and everything is stock and original - anything I need to look out for etc?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...