Jump to content
SAU Community

Recommended Posts

Hey guys,

Ive got a complete R33 manual Series 1 gtst. coupe

The shell has currently been taken back to bare metal for a respray. can sell the shell as a whole or keen to wreck.

Let me know what you need, as it is a complete car.

Also have a complete drivers side door in silver (mint condition)

Located brisbane southside.

0419 743 272

i need wheels!!! are the tyres legal?

Hey mate,

unfortunately all I have is a pair of fronts, a shitload of R33 stockos, and a set of R34 GTT wheels in flat black.

i only need 2 wheels preferably the same for the rear with preferably the same tyres on them and legal.

What just for skidders? don't care to mix and match(doesnt matter 16/17/18? i can see what I have got

how much for 34gtt wheels pm me

$200 bux for the R34 gtt wheels, they are in flat black and one has some gutter rash (big swipe,) just needs more flat black

hey mate are u selling gear box engine ect if so how much

pms sent.

Hey mate,

Box and engine are already sold. have spare bottom end are bare heads but thats are far as I go.

Oh yep, got a bare long with a 125,000 genuine kms on it, 155 psi across all six though she wouldn't part from me unless $1100 was swung my way.

how much would u want for both front brake calipers and rotors?

Pm me.

Hey mate

unfortunately not parting out brakes,

Going to be sold as a complete 5 stud conversion for $500

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...