Jump to content
SAU Community

Recommended Posts

Probably not the correct section for this thread, if it should be publically discussed at all.

I spoke with the seller, very nice guy.

The car was imported by all people mover (also known as all imports / sports auto group).

Definately looks legit, Gold compliance plate, i'd love to buy it but don't have the funds, not one to time waste about the car if i don't have the cash, just thought it would be well worth a look for someone chasing a R34 as its the cheapest nur i've seen for sale. Apologies if this was the wrong section to post.

its not the super super bargain of a lifetime you guys are claiming. My mate picked up a mint nur with a titanium exhaust and a whole heap of other goodies for around the 60-65 mark 12 months ago. So this at 55k is on the lower end of the scale for nurs.

close this stupid thread, a person on sau is not selling there car

Whow just take a breath there tiger.

This is a forum and maybe, just maybe, op decided out of the kindness of his heart to post up what he thinks is a bargain and could very well help someone out on this forum.

Hate it when people get mad over trivial shit.

If someone was bad mouthing a car (a daily occurrence in this section which should but doesn't get policed) that's fair enough, but it's an open and friendly discussion, get a life

Could you elaborate on why.

I have been contemplating visiting their showroom on Pmatta Rd

for an R34.

Would be more than happy to mate, Just not publically...

Shoot me a pm if interested.

Whow just take a breath there tiger.

This is a forum and maybe, just maybe, op decided out of the kindness of his heart to post up what he thinks is a bargain and could very well help someone out on this forum.

Thats exactly what it was, not putting a gun to anyones head telling them to buy it, just sharing in what my opinion is a good deal considering what you see nurs are selling for, don't get me wrong i haven't enquired about the car but i'd love to own a nur one day and i'm sure there are many people on here that would love to as well. Just trying to share with people out there that may not have seen it and could potentially get the car they are looking for. Didn't mean to step on any toes and i'm definately not trying to bad mouth any cars. Just sharing with the community whats out there! isn't that what we use forums for??? just my 2 cents

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...