Jump to content
SAU Community

Recommended Posts

It's DECA time people

At at this time we once again ask for your assistance.

For this event to run SMOOTH on TIME and SAFLEY we need a small group of volunteers (Officials ) to

Help out in 3 sections in the morning and 1 in the afternoon.

All Oficials on the daywill be supplied lunch and drinks and go in the draw for some great SAU gear.

An Officials breifing wil be held before the drivers breifing so all Officials will need to be at

the DECA complex by 8.30 am on the Saturday morning.

So if your thinking about coming up for a look and not competing this is a great way to get up

close to the action. Also if you are competing and bringing a friend or 3 it would be great if

they could put there hand up to help out on the day.

So if this sounds like you or your friends post up in here or send me a PM and i will your names down

Cheers... WayneO

MORNING

LONG WANG

STARTER..

TIMER....Kieran

FINISHER

SPOTTER

SPOTTER

MINI WANG

STARTER...Andy

FINISHER..Colin

TIMER.. Juliette

SKIPPAN

STARTER..Wayne

TIMER....Russell

FINISHER..Martin

AFTERNOON

SKIDPAN.

STARTER..Wayne

TIMER

TIMER

FINISHER..Martin

FINISHER

Link to comment
https://www.sau.com.au/forums/topic/396029-deca-officials/
Share on other sites

Can I just mention that last DECA's severe lack of willing volunteers was very frustrating. It should never have to come to having to beg someone to help out - after all they're not paying to spectate the day and volunteering gets you much closer to the action.

If you are coming up and you're not driving, put your hand up to volunteer. You won't regret the decision. Hell, I haven't driven a DECA since '09 but I've barely missed one since!

Link to comment
https://www.sau.com.au/forums/topic/396029-deca-officials/#findComment-6292387
Share on other sites

I thought last DECA we had too many volunteers? When I turned up with 5 of us ready to help we were told we weren't needed anymore.

Either way I should be able to help, just need to make sure no assignments are due around then.

Link to comment
https://www.sau.com.au/forums/topic/396029-deca-officials/#findComment-6294279
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...