Jump to content
SAU Community

Recommended Posts

my car is a 1996 nissan r33 skyline series2 and this is my problem and need help

okay well hears whats happening i brought my car about 3/4 months ago i think and about 2/3 months ago i noticed it was blowing smoke some times like in boost or turning right and some times just every day driving but its not constant. at first i thought it was worn rings so i put it off and the compression test showed 165/170 across the board so i know its not that and then i started to think it may have been the turbo so i replaced it and still blowing smoke!! i think its way to much smoke to be blow by and its funny its just happening some times(that i can see) so i don't know what else it could be

???maybe worn valve seals?????

i just want the hunt to be over and not have to worry about checking the oil and when hitting boost or just daily driving killing the people behind me so any ideas or thoughts if any one has had this problem be for and that could tell me what to do would be great thanks

also another thing is my car is missing around 4500-5500 i think because of the coil packs i have changed the spark plugs and my fuel pump seem to be on 20/7 so i think theres heaps of fuel presser so the only think it could be is the coil packs shitting them selfs? there stock coilpack

im running 9.5 - 10psi and i have tried turning it down and its still there

Link to comment
https://www.sau.com.au/forums/topic/396828-my-car-is-blowing-smoke-help/
Share on other sites

you have to fix the miss anyways =/ unless its related to a tune issue ??

check your coilpacks properly .. u can ussually tell the difference between a spark miss and a tune miss

check for corrosion , smell , or split leads ??

check your plugs aswell .. ussually a good indication if a cylinder is down

no point attacking the head when it could be something small like AFM coilpack or timing .. PCV vavle ? lol

What colour is the smoke?

my car is a 1996 nissan r33 skyline series2 and this is my problem and need help

okay well hears whats happening i brought my car about 3/4 months ago i think and about 2/3 months ago i noticed it was blowing smoke some times like in boost or turning right and some times just every day driving but its not constant. at first i thought it was worn rings so i put it off and the compression test showed 165/170 across the board so i know its not that and then i started to think it may have been the turbo so i replaced it and still blowing smoke!! i think its way to much smoke to be blow by and its funny its just happening some times(that i can see) so i don't know what else it could be

???maybe worn valve seals?????

i just want the hunt to be over and not have to worry about checking the oil and when hitting boost or just daily driving killing the people behind me so any ideas or thoughts if any one has had this problem be for and that could tell me what to do would be great thanks

also another thing is my car is missing around 4500-5500 i think because of the coil packs i have changed the spark plugs and my fuel pump seem to be on 20/7 so i think theres heaps of fuel presser so the only think it could be is the coil packs shitting them selfs? there stock coilpack

im running 9.5 - 10psi and i have tried turning it down and its still there

Edited by JustinP

Hey guys I am Wilderboys house mate.

Currently the car has not been tuned its still running the stock 33 ECU.

If it is missing then its not going to be a tune miss.

I might swap my coil packs with him so he can test them.

Also we dont have the equipment for a leakdown test so will get that organised

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...