Jump to content
SAU Community

Recommended Posts

Trying to find a set of preferably ID2000's to suit R34 RB25 NEO running E85.

Hey,

We have the injector's which are BOSCH 2200cc however they are not match flowed by injector dynamics but by a different mob.

- Brendan

  • Replies 191
  • Created
  • Last Reply

Top Posters In This Topic

Hey Brendan,

I'm looking for some top feed high imp injectors for an E85 convert for my NEO. Whats the cheapest option for anything 600c and higher?

Thanks,

Tom

Price on id2000 for r33 gtr 11mm with adapters etc for standard rail.

Hi,

Price on the lot would be $840 incl. delivery. That's the BOSCH 2200cc injectors, plugs and 11mm o-ring extensions.

- Brendan

Would you have a price for a new set of 440cc for a stock set-up?

Hi,

Are you referring to the green BOSCH injectors? How many do you require?

- Brendan

Hey Brendan,

I'm looking for some top feed high imp injectors for an E85 convert for my NEO. Whats the cheapest option for anything 600c and higher?

Thanks,

Tom

Hi Tom,

You can't go wrong with the BOSCH EV14's, top feed, 725cc.

They are E85 compatible and I can do a set incl. plugs and extensions for $590 incl. delivery.

Cheers,

Brendan

(VM)

Hi Tom,

You can't go wrong with the BOSCH EV14's, top feed, 725cc.

They are E85 compatible and I can do a set incl. plugs and extensions for $590 incl. delivery.

Cheers,

Brendan

(VM)

Thanks Brendon. So they are 100% plug straight in for the NEO engine?

Sounds great, if I could also grab a price on a set of 850cc or higher that would be awesome, as I'll also be getting another set of 6 for a mate.

Thanks for your time,

Tom

Thanks Brendon. So they are 100% plug straight in for the NEO engine?

Sounds great, if I could also grab a price on a set of 850cc or higher that would be awesome, as I'll also be getting another set of 6 for a mate.

Thanks for your time,

Tom

Hi,

They will require professional installation and the harness would most likely need to be hard-wired with the plugs provided. These are universal injectors but are very common today on all RB series engines.

The ones up from the 725cc are the 1000cc which are $640 for the entire set-up.

- Brendan

Hi,

They will require professional installation and the harness would most likely need to be hard-wired with the plugs provided. These are universal injectors but are very common today on all RB series engines.

The ones up from the 725cc are the 1000cc which are $640 for the entire set-up.

- Brendan

Thanks Brendan,

I'll get back to you with my order.

cheers,

Tom

  • 2 weeks later...

after 2200cc injectors to suit a vq35det can you help me out and a price please mate

Hey,

I can do 6x of the BOSCH 2200cc injectors for $830 incl. delivery.

This would include extensions to suit either 11mm or 14mm o-ring size and Denso plug's.

Let me know what you think,

Brendan

(VM)

  • 3 weeks later...

Chasing a quote on ID1000cc and ID2000cc for a R32 GTR using standard fuel rail. Including extensions etc for fitment to stock rail.

Cheers

Adrian

Chasing a quote on ID1000cc and ID2000cc for a R32 GTR using standard fuel rail. Including extensions etc for fitment to stock rail.

Cheers

Adrian

Hey Adrian,

Price on a set off the 1000cc injectors would be $640 and 2200cc injectors would be $820.

Both price are inclusive of delivery and come with the required 11mm o-ring extensions and plugs.

- Brendan

  • 1 month later...

Hi after a price on ID 1000s and I'D 2000s 11mm drop in kit for a standard r32 gtr fuel rail

I want the ID as they are supposed to come with dead time compensation values across the entire pressure and voltage range

Hi after a price on ID 1000s and I'D 2000s 11mm drop in kit for a standard r32 gtr fuel rail

I want the ID as they are supposed to come with dead time compensation values across the entire pressure and voltage range

Hey,

We don't stock the ID flow matched injectors, our ones are flow matched by a sister company.

The injectors themselves are identical BOSCH EV14's to what injector dynamics use.

We also don't do a drop in kit's for the GTR, some modifications will be required.

Let me know what you thin,

- Brendan

(VM)

This guy, Brendan, super awesome service. Took my call after hours and sorted payment within the hour. Had it posted the next day! Can't speak highly enough of the service and I'm definitely going to keep coming back. Good work man




  • Similar Content

  • Latest Posts

    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...