Jump to content
SAU Community

Recommended Posts

Hi VultureMotorsport, I'm wondering on some prices I'm after 1000cc injectors in 3/4 length for my rb25det neo. I've got a stock manifold and a sard rail with a plazmaman plenum if that's any help? I will look forward to your reply and I hope to talk soon. Thank you. Cheers. Mick

  • Replies 191
  • Created
  • Last Reply

Top Posters In This Topic

Hi VultureMotorsport, I'm wondering on some prices I'm after 1000cc injectors in 3/4 length for my rb25det neo. I've got a stock manifold and a sard rail with a plazmaman plenum if that's any help? I will look forward to your reply and I hope to talk soon. Thank you. Cheers. Mick

Hi,

Sure, so a complete set with correct extensions and plugs would be $750.

It would include the BOSCH E85 1000cc injectors which are al match flowed, the plugs would be converters so you can mane sure of the original harness and the extensions would make them flu length.

Let me know,

Brendan

(VM)

  • 1 month later...

are bosch 1000cc injectors e85/flex compatible?

Hi,

Sure are mate, they can be used with any race fuel.

Cheers,

Brendan

(VM)

  • 2 weeks later...

NEW

> 1600cc BOSCH Short Injectors available!

:w00t::w00t::w00t:

do these have the EV1 connection for RB26 plugs or req adapters and can these be made to fit RB26 fuel rail?

If so how much?

Edited by mr skidz

do these have the EV1 connection for RB26 plugs or req adapters and can these be made to fit RB26 fuel rail?

If so how much?

Hi,

That is correct, they have standard BOSCH EV1 plugs.

The original rail uses buffers rather then o-rings so some modifications will be required.

Is swapping over to a top feed set-up an option?

Brendan

(PEC)

  • 2 weeks later...

Rb26 is top feed Injector.

When you say buffer what is that exactly?

You mean caps for height /fitment.

Hi,

Modern injectors use an o-ring to seal, these use a buffer seal so modifications will be required for fitment to the rail.

Brendan

(PEC)

  • 3 weeks later...
  • 2 weeks later...

Hi there,

could you please pm me how much for a ID1000 setup.

im going to be running e85 and currently have a standard 25 head and rail.

Thanks

Hi mate,

Sorry for the delay in replying.

So a complete set-up with plugs and extensions would be $640 for you.

These would be genuine BOSCH 1000cc EV14 injectors as used by ID.

We don't stock the ID's.

Please let me know,

Brendan

(VM)

  • 2 months later...

Hi VultureMotorsport,

Can I please get a price on a set of something around the 550cc mark (or a little bigger) which will be a drop-in replacement on the stock R33 gts-t rail (side-feed)? Also, for comparison, can I get a price on something around the 750cc range and the 1200cc range?

Cheers,

Samon.

  • 2 months later...



  • Similar Content

  • Latest Posts

    • Ha ha ha, that's fair mate! We have the crackhead dogs now. Mainly because the missus wants the crazy dogs while she still has the energy and capacity to be able to keep up with them! Ha ha our current two are both Working GSD, there brothers and sisters (from the same litters) are in Police, Corrective Services, and I believe one did end up in defence force too. They're wild and fun, yet right now, both curled up asleep on the lounge room floor while we watch some TV. Mal is very likely the next dog (unless I get my couch potato guardian dog 😛 )   What are your Kitties names? Are you planning some house work, like those high kitty shelves, built in scratching post, and some cat passages from one room to another room?
    • Maine Coone, did look at but to big and fluffy As for performance dogs, we had Mals at work, performance dogs are fun to watch, but, way to much work for this old rooster
    • Yep, it was only an option on the Q50 Hybrid.  Same in Japan as far as I know. And doesn't use a centre diff like the Suby's do, so not the same as the WRX.  But it also isn't a reactive AWD like other Nissan AWD vehicles are, eg. Murano/Xtrail/etc.
    • You should have got a Maine Coone then. Only thing is they're big. But so cool, and just like a dog. Or, just get yourself a high performance dog. That'll teach you for wanting Parkour indoors 😛
    • Are you thinking of Bens R32? I don't remember if his went through the bonnet itself, but it went through the chassis rail. Brad (RISKIN) bought it, and turned it into a track car. It's funny how anti people are of Jim Berry now. I remember when I pulled mine out (during an engine change) and inspected it and found it cracking badly. At that point in time so many people were even on SAU, were so pro Jim Berry, and that was after Bens GTR exploded his quite publically.
×
×
  • Create New...