Jump to content
SAU Community

Recommended Posts

brand spankers hks twin power to suit r33gtst series2 and r34 gtt and r34 gtr with loom to suit all models listed direct plug and play$500 no cheaper nengun sells for $648 plus postage..

hks 3037s pro with stronger internal gate $1200 brand new ( sold car and dont need it anymore)

stainless performance exhaust mainfold for rb25det $200

standard vct head for series 2 rb25det perfect condition $500

standard r33gtst series 2 computer $200

standard rb25det injectorsx6 $150 purple tops.

standard r33 gtst intercooler $150

standard airbox for r33 gtst $100

standard intake manifold r33 gtsts rb25det $150-

q45 throttlebody 90mm complete $150-

splitfire coils 5x for rb26dett r32-r33 $300-

standard rb25det coils x6 $200-

2 standard rb25det exhaust manifolds $50-each straight no cracks.

nismo copy frp side skirts for r33 gtst or gtr $150 for pair unpainted

r33 gtsts rear widebody guards frp $300 for pair unpainted i paid over $500-

zex NOS kit complete nearly new used a couple of times wet system up to 150hp shot with filled bottle and bottle warmer (awesome kit) $500- I paid over $850

i will post some pics tonight.

make me a reasonable offer on all items i might consider it but these prices are VERY CHEAP as you would know.

Very keen on the wide guards. Where are you located? Looking to sort something out. Can you send a pic of the guards to 0411 087 701

Says your PM is full.

Can you please post or PM me pics of the Twin Power module?

Does the kit just have everything it needs to just plug in and go?

  • 2 weeks later...

post-23901-0-36715500-1335405135_thumb.jpgpost-23901-0-74798400-1335405226_thumb.jpg

parts still avaiable for got to mention i have an rb25 vct series 2 head $450 plus postage perfect condition includes cams.

Edited by ax53b70p25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...