Jump to content
SAU Community

Recommended Posts

Google search will do.

Or unless you want the numbers of how many of them were made in each specific colour.

Here the specific colour names:

whiter34gtrnurback.jpg

QM1 - White

blackskylinegtrvspeciin.jpg

GV1 - Black Pearl

greynn.jpg

KR4 - Sonic Silver / KV2 - Athlete Silver / WV2 - Sparkling Silver: These Silver colours will vary then the on pictured.

redqy.jpg

AR2 - Active Red

bluerb.jpg

TV2 - Bayside Blue

WV2 Sparkling Silver was available, i have info saying both whites QM1 white and QX1 white pearl were sold in the nur edition cars not sure i only think QX1 was a option, TV2 bayside blue ,GV1 black pearl , JW0 millenuim jade , EY0 Silica Breath didn't come on the V-spec 2 nur but did come on the M-spec nur and M-spec models

If you are looking at buying a nur spec then white and millennium jade will come up for sale more often, reason being they made a lot of them

in these two colours as white is the Japanese motorsport colour and millennium jade is unique to nur spec ,

Quote GTROC not are if its correct

OK, OK Cem,

What I meant was all the standard colours that were available when the Nur was for sale.

The whole list (for VspecIINur) is;

Millenium Jade

Bayside Blue

White Pearl

White

Sparkling Silver

Black Pearl

__________________

Had a look at a couple GTR mags i have, found a photo of a M-spec Nur in the gold silica breath colour it was at a 34gtr owners meeting out of the 34 Nur's that turned up it was the only one so could be quite rare and does look like the white colours QX1 and QM1 were available on the Nur edition cars

yeah you would think it would have been an option for the M-spec nur considering it was a colour available at the time

must be rare or all the owners in Japan are hanging on to them because i have never seen one come up for sale

  • 3 months later...
  • 5 weeks later...

In typically ambiguous fashion, one of the Japanese books I've got mentions that, across all 1000 Nurs, Millennium Jade was the most popular colour (28%), followed by pearl white (22%) followed by white (16%)....but doesn't give any other indication of what other colours were made. It does make mention of Bayside Blue and Silica Breath further on but I'm not sure in what context.

As an apprentice painter at Nissan, if I'd created a slight blemish on "White" in the paint shop, the boss would go over it for sure in "Silica Breath".

If I'd had a night out on the sake and wee'd on a "White" Nur, the boss would cover it up with "Bayside Blue" which is why the paint thickness is way up there.

Now I'd never been sacked from Nissan, but the apprentice who was - well, all his Nurs ended up "Pearl Black"

...my dream...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...