Jump to content
SAU Community

R32 Gtst Rb25

Confused91
 Share

Recommended Posts

Confused91 Contributor

Confused91

Posted
Posted

hello everyone selling selling my 1990 r32 gtst with a series 1 r33 rb25, first off the car is an automatic and has 76000kms on the clock i know most of you will call bullshit but honestly the interior or the car reflects this, exterior of the car needs some tlc but everything has been considered in my price.

ok now the good part MOD LIST :D

r33 series 1 rb25 with 120000kms on it the engine has some fruit its been pulled apart and had the bottom end rebuilt with race bearings and the head has been ported and polished

Rb25 turbo rebuilt and hi flowed but never run more then 12 psi

gearbox is automatic but has also been completely pulled apart and rebuilt with drag bearings, shift kits, 2800 hi stall and drag torque converter, truly beatiful gearbox IMO

r32 gtr brakes front and rear and front strutbrace

has a turbosmart boost controller running 7 psi and 12 psi at the flick of a switch

has autometer lunar series boost guage so you know whats goin on

thats pretty much all that i can think of atm,completely open to anyone coming to have a look and with all means you can take it for a spin but i will be going with you and please no tyre kickers or time wasters genuine reason for sale i dont want to sell i have too,

price is $10000 ONO if u dont like my price throw me an offer!

http://s1030.photobucket.com/albums/y367/Confused91/r32%20gtst/

cheers everyone, Chris

Link to comment
https://www.sau.com.au/forums/topic/396960-r32-gtst-rb25/
Share on other sites
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...