Jump to content
SAU Community

Recommended Posts

Keen to see the dyno results on this Piggaz ..

I am too! HURRY UP FARKEN!!!!

Just ordered at Nismo GT PRO diff centre to go into the rear. It was either that or a Quaife. That'll stop the single peggers which have started since putting the front Quaife unit in!!!

Rightio. Bit of an update.

At 19 PSI (boost controller turned off) it's best run was 417 rwkw at 7400 RPM . That stupid missfire is still there. A few theories floating around at the moment. A dud valve spring or injectors (although AFR's are holding true even when its doing its silly noise). Yavuz did make the comment of "there is so much left in this".

We turned the controller on to do a few tests. 26 PSI was all in by 4300 RPM. I did see 375 rwkw by 5000 RPM (at 23 PSI I think) which is pretty close to my goal of 400rwkw by 5K! Yavuz did say we are looking at 440-450 rwkw. Considering cams have not been touched yet, it's looking promising.

Also. I switched across to an ECU called "Blackbox". Unigroup run this in their Racecar. Its been made into a plug-in version for our cars. I only ditched the link because I ran out of input's on the Link. Ethanol Content sensor's, Oil pressure, fuel pressure, wideband blah blah. Yavuz made me jump in the seat and have a play with the throttle. It's so bloody touchy! I noticed this change going from Power FC to the Link, but it's that again.

Mad stuff. That black box is freaky!!

Guy plugged it into my 34 along with MAP hose to ECU and started and run after a minute configuring inputs etc on his laptop.

Then Paul made my engine suck a rag.......eh Paul :no:

417 on 19 pounds .. This is gonna make some when its sorted properly and you turn the wick up .

Hopefully you get the miss sorted soon .

Btw, what cams are you using now ?...or is that something your keeping hush hush on .

Mad stuff. That black box is freaky!!

Guy plugged it into my 34 along with MAP hose to ECU and started and run after a minute configuring inputs etc on his laptop.

Then Paul made my engine suck a rag.......eh Paul :no:

Sorry about that. I was trying to help by cleaning your pipes out. :D. We are going to run fuel temp compensation just because we can :D

417 on 19 pounds .. This is gonna make some when its sorted properly and you turn the wick up .

Hopefully you get the miss sorted soon .

Btw, what cams are you using now ?...or is that something your keeping hush hush on .

Yeah the miss is pissing us all off. Stupid thing. Cams are between 258 and 262 with + 10.8mm of lift. We ground our own as we found the JUN and Tomei ramp rates wern't aggresive enough! Yavuz has since made a more rampier cam. Bugger bucket and lobe wear. Give me air! :D

Gotta breathe!!....says me with stock cams haha...

Miss could be down to a trigger issue, a tooth is just that tiny bit out at x RPM.....

Just poking in the dark!!!!, as you guys have been through the plugs, coils, ecu ect...

Gotta breathe!!....says me with stock cams haha...

Miss could be down to a trigger issue, a tooth is just that tiny bit out at x RPM.....

Just poking in the dark!!!!, as you guys have been through the plugs, coils, ecu ect...

There are no flashes on the trigger box inside the car. If you hold half throttle it'll go to 8,500-9000 RPM without an issue. It's just when you load the farker up! Every single run it does it. Injectors are first then go from there :(. FFS, I just wanna launch it and row gears!!!!!!!

Sorry about that. I was trying to help by cleaning your pipes out. :D. We are going to run fuel temp compensation just because we can :D

Yeah the miss is pissing us all off. Stupid thing. Cams are between 258 and 262 with + 10.8mm of lift. We ground our own as we found the JUN and Tomei ramp rates wern't aggresive enough! Yavuz has since made a more rampier cam. Bugger bucket and lobe wear. Give me air! :D

Jeez, that quite a bit of lift and not as much duration as I thought you would probably be using .

Jeez, that quite a bit of lift and not as much duration as I thought you would probably be using .

Dont need 280's\290's in a street car. At some stage we will be going smaller duration (about 255ish) but more lift (11.3 +). See how that goes.

Also, this is all using the factory airbox!

sounds very promising Paul.

Be really keen to see how she pulls once your miss is sorted and 23psi of pure love ;)

It'll be tuned for 25. Gonna do a "hero run" at 30 to see what these little babies can do. I'd say they will be all over by 25 psi but whats one run? haha.

I'll probably dial the intake cam back a fraction more the get more midrange. See what the engine likes.

Dont need 280's\290's in a street car. At some stage we will be going smaller duration (about 255ish) but more lift (11.3 +). See how that goes.

Also, this is all using the factory airbox!

Your engine sounds very similar to what mine is ( capacity & your intended power level ).

I wasn't entertaining the use of 280's or 290's...but was thinking something along the lines of a 10.5 & 268 , since one of my old JUN's is now damaged.

You have now chucked a curve ball at me in regards to the cams I will go with ..so I eagerly await a proper figure once sorted from your test mule . :D

And I will be keeping the factory air box , but using a large carbon duct to the bottom of it that came off Geoff fear's gtr .

Edited by ezy_09s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...