Jump to content
SAU Community

Recommended Posts

Hey guys

Just noticed siting at idle if I tap the accelerator slightly it drops revs then picks up.

Idles at about 800-900 but with the tap drops to near 500

Could this be related to my current issue with my throttle being jerky as I either come off throttle or coming onto throttle.

I been reading up and few people said TPS voltage and with the jerking throttle while driving can also be related to the diff needing to be shimmed.

Thoughts guys please?

Link to comment
https://www.sau.com.au/forums/topic/397867-slight-tap-drops-revs/
Share on other sites

It is most likely that the TPS is not adjusted properly. The way I used to adjust it (RB20, not 25, but should be same) before knowing about what the closed throttle TPS voltage was supposed to be was to set it so that the slightest movement of the throttle would cause the injectors to do their little double pulse (you can hear it happen). That was close enough to the correct setting that it was always fine. The actual at rest voltage is about 0.4v.

I will check the TPS voltage when I get a voltage checking gizmo

Tune was only recent and I spoke to DVS about it and he said could possibly be that.

But I only just noticed it doing it at idle so it was kind of hard for him to diagnose over messages

I'll post the results up in here

Yes it will be in the tune, wen it goes from idle map to fuel and ignition map. Ur nistune was a bit of a pain in the tps department.

Remember it was way out and i had to adjust the tps trigger voltage. I mustnt have got it perfect.

Try adjusting the tps slightly either way otherwise i will have to fix it up for u :)

Yes thats correct. The rb20 ecu has a tuneable tps trigger voltage. Rb25 doesnt as they use a different tps that works off a set voltage to trigger idle maps on and off.

Yes i got it to turn on and off but it mustn't be perfectly adjusted.

U will need a multimeter or consult cable to adjust it. Or u can try trial and error. But make sure u mark it before u adjust it incase u go backwards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...