Jump to content
SAU Community

Recommended Posts

I hope you peeps can help me on getting my first 'line.

I have a budget of 20-25k AUD *ish*, and am looking at buying one within a month's time.

After looking about i've pretty much settled on:

R33 1994/5 *Ish* GTST

Reasonable body Kit (Ideally with modded cooling)

Minimal rear spoiler (Not a GTR/monster wing)

Reasonable mods (BOF, uprated brakes, Exhaust etc)

60-90K on the clock if possible

Not fussed about the sound system, as i'll be putting in a media box etc

As good mechanical condition as possible (I'm based in Bathurst, don't want to do too many Syd trips)

Do you peeps think that's a reasonable budget for the above? - should I be looking at a newer, or older one? I'd love a R33 GTR, but that isn't going to happen :-(

If I approached a dealer with cash rather than going credit, are they likley do do a better deal? ( aka bank transfer, not dollars in a bag ;-) )

Other questions -

Exhausts - I know a lot of people go for noisy exhausts for 'lines, but i'd like one that doesn't drop the power available, but is relativley quiet, not waking everyone up with 5 blocks when started :-) Any ideas what to look at?

I've had other reasonable cars before, such as BMW 3 Series', Saab 9000's etc - there are always things to look for when buying, like submarined seats, rust in specific places, odd knocks & noises to show up a lemon before buying - Is there anything to look for in a 'line before buying?

Insurance - I'm recently from the UK, and now have a NSW drivers licence, but not really any record in Aus as far as no claims bonus' etc - ( I'm over 30 ) - Does anyone reccomend any specific insurers?

Edit - Scratch the insurance - I've seen the short thread about it :throwup:

I decided it's time to have a Skyline or so around bathurst that doesn't appear when there's racing or a show on ;-)

That's the questions for the mo, TIA for any help I get.

Regards,

Zeb

Link to comment
https://www.sau.com.au/forums/topic/39811-advice-on-buyinglocating-first-line/
Share on other sites

Zebbie - considering the state of the private sale market at the moment thats a very reasonable budget. If you look hard enough you can find a nice series 2 (96'ish) model for within your budget.

Check out www.uniqueautosports.com

Nick

I guess u could look at importing only if u are prepared to wait longer though.

Also since the mods u are after are minimal, importing may be a good option.

Prestige or J spec seem to be the 2 most common importers people go through on this forum.

Prestige got a white 96 with few mods for $20k. When I imported though Prestige I added another $2k to their price (on road costs) though so maybe $22k for that one.

Takes on average 3-4 months but u can save a few $k that way.

Just something else to consider.

meh.. or a fully modified series1.. from bodykit to performance and pulling a lot more kw, and handling better as well.

series2 is nothing special. You either get a stock series1 for that price or a series1 with lots of modifications and maybe 50% more power. And any "landed and complied price" add around $2k for new tyres ($800), rego (approx $600 depending on state), aircon fixing ($200?) and stamp (approx $400 on a $20k car). But i am biased as you can tell :(

It is hard to get a good value import compared to what is available locally, especially in the R33. Which i think i can say fairly objectively. Things changed a lot after SEVS, prices are holding steady.

Good luck zebbie - do you research and you'll find what you are after I am sure.

With that price range, you should be able to get a good series 1 with some mods, such as exhaust, wheels, maybe cooler...Series 2 are a little more...they have nicer interior and another airbag if ur after safety...also series 1 don;t come with ABS as standard (i think), whereas ABS can be found in series 2 more often....any way good luck....

Oh also, one other thing......careful with Kms......Judge the car on its appearance...not the km reading :(

Do yourself a big favour and get a 96 onwards series 2 skyline. Interior is nicer, dual airbags, and a few other bits and pieces. Overall a much nicer car.

For the budget you have there should be no porblems if you are willing to be patient and wait for the perfect skyline. I just purchased a SII in Bris after 3 months of looking and i am extremely happy. Has all the mods you mentioned and was easily within your budget!

Just want to stress start looking now so you have a better idea in a month when you are serious about buying. Test drive as many as you can to get an idea of what is good and bad.

Have fun

  • 2 weeks later...

My thanks go out to all of you that responded, I should be picking up a '96 line, which is in immaculate condition :-)

It was deffo worth spending to the limit of my budget to get the car, as i will basicly have to do nothing to it, apart from enjoy it!

My form's filled in to join SAU :-D

Thanks again, and will post good pics when i can, but here's a few :

http://212.42.1.197/line/

- Zeb

Hey mate, love the pics of your car. Very nice ride! I'll soon be the owner of a black Series II which is going to be great! anyhow, i noticed your rear and side windows are tinted, but the others aren't. My car is in the same condition, can anyone explain why only a few windows are tinted and not all?

Hey mate, love the pics of your car. Very nice ride! I'll soon be the owner of a black Series II which is going to be great! anyhow, i noticed your rear and side windows are tinted, but the others aren't. My car is in the same condition, can anyone explain why only a few windows are tinted and not all?

The factory tints tend to look that way. My car looked the same ex Japan. Lot darker in the back is all. I started thinking that in Japan you couldnt tint the front sides but no

:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...