Jump to content
SAU Community

Garage Cleanout R32 Gtr Leftover Parts And R31 Headlights


Recommended Posts

Well I've finally finished putting my GTR back together and gave the shed a cleanout the other day and it's time to get rid of the leftovers mostly standard parts I've replaced with aftermarket items but a few aftermarket bits that came on the car.

Nismo Gmax twin plate clutch pull type. Came with the car I didn't get enough time in the car to really test it out but it didn't seem to slip depending on how much you enjoy pulling out gearboxes I'd probably recommend a rebuild.

post-58307-0-54349600-1334829832_thumb.jpg post-58307-0-17991400-1334830557_thumb.jpg$300

Standard manifolds and dumps

post-58307-0-77605200-1334828618_thumb.jpg$40

Standard cam gears

post-58307-0-30934100-1334828728_thumb.jpg$40

Standard computer with chip I only know this cause I removed the cover and had a look. It has a cradle soldered in with a chip in it. Not sure of what it's got on the chip but the car went unusually hard before I took it off the road.

$120

Short shifter

post-58307-0-88279800-1334828580_thumb.jpg$50

Pod filters with elbows

post-58307-0-85566200-1334828680_thumb.jpg$75

R34 GTR Vspec2 Turbos I bought these off a member on here 2 years ago fitted them and drove the car for 3 days they had done 62,000kms when I bought them. They have .48 rears and .53 fronts and are ceramic wheels as far as I know. I have the serial numbers if anyone wants more info.

post-58307-0-85893200-1334828637_thumb.jpg$300

R32 GTR turbo x1 One of the old ones off the car when I bought it not sure of kms. .48 rear .42 front

post-58307-0-30295400-1334828662_thumb.jpg$50

Full aircon setup for GTR everything from the firewall forward inc pump/condenser etc might even have belt

$120

GTR injector resistor module I have cut the plug off of this but the wiring is straight forward 1 white wire 6 black

post-58307-0-66249800-1334828753_thumb.jpgOffers

Full set of stock GTR intake pipes inc the 2into1 blowoff valve return pipe

post-58307-0-83745000-1334829727_thumb.jpgOffers

Replacement coil pack plugs x4 I needed 2 had to buy 6

post-58307-0-62883000-1334830066_thumb.jpg$25

Stock thermo fan

post-58307-0-11145300-1334829748_thumb.jpgOffers

Stock boost control solenoid

post-58307-0-32367400-1334830082_thumb.jpgOffers

R31 series 3 headlights perfect condition

post-58307-0-28823900-1334828600_thumb.jpg$100

Jap spec yellow projector spotlights

post-58307-0-95503700-1334828706_thumb.jpg$40

Stickers 2x small 1xmed 1xlarge

post-58307-0-28572100-1334829678_thumb.jpg post-58307-0-14063200-1334829712_thumb.jpgOffers

Gearstick boot

post-58307-0-19460500-1334829792_thumb.jpgOffers

Speco 7mm slip on wheel spacers

post-58307-0-95115000-1334829812_thumb.jpgOffers

S13 adjustable camber tops Brand new I'll post pics tomorrow<p>$10

Edited by trustr32

S13 adjustable camber tops Brand new I'll post pics tomorrow<p>$100

Hey pipster sorry about that but I have obviously missed a 0 when I edited the post they're supposed to be $100 It has also deleted my mobile number so if anyone wants to txt me it's 0419176656 I'll get those pics up this arvo.

Pipster they fit the 31 strut tower but the threaded sleeves/ nuts they come with don't fit the thread on the top of the shocks. Well they didn't fit Monroe gt shocks anyway ji was going to get different ones machined but I sold the car before I got round to it. Sorry I've been slack I'll put pics tomorrow.

Hi stuart sorry I spent the day down home today and I get stuff all reception I'm headed to Kingston in the morning so I'll give you a call then.

Justin I bought them off eBay $50 a set with all the new metal plugs grommets and the actual plug housings.

Hey lad's some pictures I have been meaning to put up for a few days now.

Afew things are on hold for a few people and the short shifter is already sold to NISSANGTS

Stock intercooler pipes, A/C setup, stock mani's and pods with adapter elbows are on hold for jangles

S13 camber tops are on hold for pipster

Here's pics of the intercooler pipes layed out.

post-58307-0-07894900-1335083258_thumb.jpg post-58307-0-17936600-1335083299_thumb.jpg post-58307-0-77392300-1335083335_thumb.jpg

Pic's of the camber tops

post-58307-0-69153900-1335083580_thumb.jpg

And pics of the R32 GTR ecu it also has a link cable thats been put into it at some stage not sure what it's for exactly but it's got a jap sticker on it.

post-58307-0-09928100-1335083422_thumb.jpg post-58307-0-24061500-1335083463_thumb.jpg post-58307-0-06611200-1335083506_thumb.jpg post-58307-0-19617100-1335083548_thumb.jpg

A/c setup found out today that I must have ditched the 2 lines that run from the firewall to the condensor unit so looking for $90 now

post-58307-0-18210400-1335083370_thumb.jpg

  • 1 month later...

Hi mate,

Is the R32 GTR ECU stock (other than the link cable), and you know its working? Also how much?

I'm looking for one to put a nistune board in.

Cheers.

And pics of the R32 GTR ecu it also has a link cable thats been put into it at some stage not sure what it's for exactly but it's got a jap sticker on it.

post-58307-0-09928100-1335083422_thumb.jpg post-58307-0-24061500-1335083463_thumb.jpg post-58307-0-06611200-1335083506_thumb.jpg post-58307-0-19617100-1335083548_thumb.jpg

Na man it's got a cradle soldered in and I'm pretty sure it's an aftermarket chip in it. Came out of the car when it was running and went rather hard so not sure whats on the chip. Wanted $120 for it.

Na man it's got a cradle soldered in and I'm pretty sure it's an aftermarket chip in it. Came out of the car when it was running and went rather hard so not sure whats on the chip. Wanted $120 for it.

Cheers for the info (sorry I missed the text in your first post without the ecu pics).

Sounds like a good ecu but probably not worth cannibalising it for a nistune mod. Thanks anyway.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...