Jump to content
SAU Community

280Zx Reliability

LayneGXE

By LayneGXE,
in Engines & Forced Induction

 Share

Recommended Posts

alex182 Mentor

alex182

Posted
Posted

it's mostly a case-by-case basis. depending on how good condition the specific car is.

have a read of this, things to check for when inspecting an old z

http://www.zdriver.com/forum/240z-280zxt-s30-s130-tech-tips-275/280zx-common-problems-checklist-purchase-inspection-16386/

as well as the usual rust inspection for old cars

LayneGXE Enthusiast

LayneGXE

Posted
  • Author
Posted

Thanks for the link, i think i've read that somewhere, would you say a R31 (with 100k Kms) would be better?

They're the same price.

The Zx looks to be in good condition (completely un-modified with OEM wheels and radio still on) and apparently no rust. I may check it out today, but i've been told by some that it's bullet-proof and others that it's only good for a project

mad082 Grand Master

mad082

Posted
Posted

what are you wanting out of the car? what are you planning on using it for? how much are they wanting for it? if it's going to be a daily driver and you simply want it for getting from A to B then there are probably better choices out there, unless it's dirt cheap. but if it's dirt cheap then you have to ask why it's dirt cheap.

LayneGXE Enthusiast

LayneGXE

Posted
  • Author
Posted

Well it's 2.5k, looks as though he has another one, yeah i want it to be a A-B car with some fun on the side. I was wondering why its so cheap considering the money the guy has poured into it.

This thread isn't needed anymore however, have decided to just go with an R31, will be more reliable and suited to me than the 280 will be (Until the future).

  • 2 weeks later...
LayneGXE Enthusiast

LayneGXE

Posted
  • Author
Posted

I think the R31 is quite a deal lighter than the 280ZX isn't it?

Wasn't exactly aiming at performance, as you shouldn't when looking for a first car, you'll be only let down.

But, however, disappointment is one thing i have not felt with the 31. Amazing car!! Reliable, Agile, Fast enough for me and very comfy.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...