Jump to content
SAU Community

Recommended Posts

Hey All,

My old for sale thread sorta just got added to and is old and messy now.

Thought I would start a new thread that actually had the items for sale listed.

All items are located in North Brissie. (unless stated)

Postage can be arranged, at buyers expense.

My best contact is either mobile 0428142684 or email [email protected]

rb26 coil packs - $200 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

sard 800cc injectors - $600

These have about 5000km of use on them. I wil be upgrading to higher flowing injectors. - does not include fuel rail.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

post-39837-0-47555100-1334923847_thumb.jpg

post-39837-0-80276700-1334923858_thumb.jpg

post-39837-0-55250200-1334924037_thumb.jpg

post-39837-0-92392000-1334924144_thumb.jpg

injectors fully sold.

items still available:

rb26 coil packs - $150 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

Open to offers people, worst I can say is no thanks.

bump.

and back on the market, if anyone is interested...

short motor component of my engine. Done about 5000km as well.

N1 Block

Tomei 2.8L cooling channel type kit (pistons, rods, crank)

Tomei oil pump

ATI 1000hp type balancer with the pulley for the water pump.

Tomei sump baffle.

um... *shrug* 10k?

Tomei oil pump sold.

This is as far as I want to split it, as if i decide to keep the bottom end i it is getting dry sump.

rb26 coil packs - $150 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

  • 3 months later...

Greddy plenum - $800 $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

If you want pics let me know and I can email them or text them.

Greddy plenum - $800 $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

If you want pics let me know and I can email them or text them.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...