Jump to content
SAU Community

Recommended Posts

Hey All,

My old for sale thread sorta just got added to and is old and messy now.

Thought I would start a new thread that actually had the items for sale listed.

All items are located in North Brissie. (unless stated)

Postage can be arranged, at buyers expense.

My best contact is either mobile 0428142684 or email [email protected]

rb26 coil packs - $200 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

sard 800cc injectors - $600

These have about 5000km of use on them. I wil be upgrading to higher flowing injectors. - does not include fuel rail.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

post-39837-0-47555100-1334923847_thumb.jpg

post-39837-0-80276700-1334923858_thumb.jpg

post-39837-0-55250200-1334924037_thumb.jpg

post-39837-0-92392000-1334924144_thumb.jpg

injectors fully sold.

items still available:

rb26 coil packs - $150 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

Open to offers people, worst I can say is no thanks.

bump.

and back on the market, if anyone is interested...

short motor component of my engine. Done about 5000km as well.

N1 Block

Tomei 2.8L cooling channel type kit (pistons, rods, crank)

Tomei oil pump

ATI 1000hp type balancer with the pulley for the water pump.

Tomei sump baffle.

um... *shrug* 10k?

Tomei oil pump sold.

This is as far as I want to split it, as if i decide to keep the bottom end i it is getting dry sump.

rb26 coil packs - $150 ono.

These are standard coil packs, spares from one of the 4 engines I had at one point, but were in working condition when the engines were stripped.

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Greddy plenum - $800

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

Stock rb26 plenum - $150: LOCATED IN TOWNSVILLE

This is off one of the engines that I had that got stripped, only the plenum, no throttle body assembly.

  • 3 months later...

Greddy plenum - $800 $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

If you want pics let me know and I can email them or text them.

Greddy plenum - $800 $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

If you want pics let me know and I can email them or text them.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...