Jump to content
SAU Community

Recommended Posts

Hi everyone, as u can see im new to these forums as i've just purchased my V35 350GT skyline this week.

The first thing i want to do with my skyline is exhaust, but i wouldn't have a clue where to start.

I basically want something that makes the stock V35 exhaust (which already sounds awesome) have a bit more of a louder grunt and a bit of a rumble whilst idl'ing.

I have around 2 grand to play around with so if anyone had some ideas on where to start i would greatly appreciate it!

I could custom make a system for that but without a location it makes it hard to recommend workshops. Do you want a custom or brand name exhaust?

i'm open to suggestions mate, anything that will sound good and bring some performance with it.

My location is Mackay QLD

for that kind of money you can get a brand name one shipped from the US with change left over. Will be direct bolt on no fuss install.

my dads awesome with cars so im still learning aha i would have to get someone to install it properly, could you suggest any brands/setups?

If you want low drone, quite when cruising but deep still and then roar above 5k then fujitsubo exhaust, megan V2 HR ypipe, HFC or resonated test pipes + stock headers

if you want more rumble and throaty but more expensive and better performing, then Motordyne exhaust, motordyne xyz pipe and motordyne ART cats + stock headers

if you want cheap and loud then a knock off HKS with megan hr ypipe

go on g35driver, there is a thread with sound/video clips of all different exhaust combinations

Edited by R6n350GT

$2k only for exhaust mods or $2k for mods altogether?

$2k for exhaust mods only = Berk HFC (~$500) + Stillen CBE (~$1200) or a knock-off HKS CBE (~$500)

$2k for all mods = Berk HFC (~$500) + Motordyne Plenum Spacers (~$250) + Sway Bars (~$300) + knock-off HKS CBE (~$500) + K&N Drop-In (~$50)

These are estimate pricing in US Dollars and excludes shipping.

Edited by 81gSKy

thanks for the replies boys i appreciate it, im looking to spend $2k MAX.

r6n350gt i was originally looking at the motordyne art cats and headers as i have heard the sound it makes and its incredible. Also that's spot on what i want, but i did want the roar to kick in at around 3-5k rpm. would appreciate it if you could post some links to websites that provide these products so i can check it out.

cheers

  • 2 weeks later...

I have been looking around at the moment i'm leaning towards the ART DT-S Dual exhaust system it comes with absolutely everything for around $1,300 which is great and it's bolt on of course.

This also has the sound that i'm looking for, do any of you own this setup?

Yet again i've had a change in mind i'm looking at going for the Motordyne Shockwave V2 it sounds insane, but more pricey at $1,500..

Is that Fast Intentions brand trusted at all i've never heard of it

Yet again i've had a change in mind i'm looking at going for the Motordyne Shockwave V2 it sounds insane, but more pricey at $1,500..

Is that Fast Intentions brand trusted at all i've never heard of it

Hahaha... Yeah it is good and loud, huh? Got them installed on my car, definitely one of the best buys.

Yes, Fast Intentions is very good too. I would rate them second below Motordyne of course. The Fast Intentions are more quiet until you floor it.

It all depends on how much you're willing to spend on just the CBE. You gotta take into account taxes and shipping costs, so you might be looking at $2k for the Fast Intentions or Stillen and over $2k for the Motordyne.

Hahaha... Yeah it is good and loud, huh? Got them installed on my car, definitely one of the best buys.

Yes, Fast Intentions is very good too. I would rate them second below Motordyne of course. The Fast Intentions are more quiet until you floor it.

It all depends on how much you're willing to spend on just the CBE. You gotta take into account taxes and shipping costs, so you might be looking at $2k for the Fast Intentions or Stillen and over $2k for the Motordyne.

Yeah man i've listened to numerous sound clips of exhausts such as STILLEN, Fujitsubo, ARK, HKS and i still think that the Motordyne Shockwave's sound the best by far.

I had a feeling shipping would be expensive, but i am happy to pay around the $2k mark for the perfect setup. If only we had some of these specialty stores in Australia better yet QLD..

I know this is a little late, but have you checked this link out:

http://g35driver.com/forums/g35-coupe-v35-2003-07/353062-aftermarket-coupe-exhaust-compilation.html

I actually haven't but there is a similar page for the G35 2007 sedan which is the equivalent of the V36. I know what I'm going to get now!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...