Jump to content
SAU Community

Recommended Posts

Ok, I feel my GTS-T is feeling a little neglected so I'm considering a 100 hp shot of NOS on demand on WOT.

RB25/30 - GT3076R - Haltech Platinum 2000. 337 rwkw.

Good move ?, or should I save the dollars and wait until my kids pillage it all.

Link to comment
https://www.sau.com.au/forums/topic/398534-to-nos-or-not-to-nos/
Share on other sites

I don't drag it.

I'm hoping for a setup which the Haltech can introduce Nos only in certain gears , revs and at WOT.

But right now my injectors are maxed , my intercooler has 2 1/2 in and out, and I'm running stock manifold.

Will I still get anything more with NOS ?

I don't drag it.

I'm hoping for a setup which the Haltech can introduce Nos only in certain gears , revs and at WOT.

But right now my injectors are maxed , my intercooler has 2 1/2 in and out, and I'm running stock manifold.

Will I still get anything more with NOS ?

As long as your exhuast is up to the extra flow, yes you will see great gains. The stock intake manifold makes it easier to get a more even distrobution from single point of injection.

Your intake pipework etc wont affect the amount of extra power you can gain from nitrous.

The trick is to get the nitrous consistant. To do this you will need a bottle pressure gauge and heater on a pressure switch.

Is the engine still stock internally? If it is, I would suggest no more than 75ph fixed shot or 100hp progressive shot. If it's built, then think 100 fixed and 150 progressive, depending on boost pressure etc.

Cheers

Justin

Put a twin scroll 3788R on it instead!

I dont usually go for performance in limited quantities. Id prefer to know I can hoon interstate if I wanted to LOL

Le mans 24hr of Hoon

So get a G size bottle :woot:

Will lift the bonnet and intake manifold 10ft off the ground if it backfires though lol

Yeah... leanouts/nitrous backfires are pretty spectacular. Only ever seen them on carbied engines though... not saying it can't happen, but I've never heard of a backfire on a FI efi engine (engines that don't mix air and fuel inthe intake manifold 'plennum').

I think it's a great 'power adder'. There is no real trade off for the extra power when you'r not using it. For an extra 100hp of kick, you don't have to use a bigger turbo- more lag, you don't need bigger injectors- fuel economy/tune resolution, your not shifting the power curve up or down- if your using cams/cam gears, there's very minimal down time for install and it dosn't cost a bundle. Not to mention the dyno curve goes straight up at activation- ha ha ha!

Cheers

Justin

Thanks for all that info.

Yep car is built forged bottom end, Poncams, and Plazaman plenum.

Exhaust is stock ex manifold to 3 inch.

Intercooler has 2.5 either side.

3076 is 0.82 Ar, should have gone 1.06.

Running 21 psi now, does have more in it.

it does feel like its choking at high rpm

Edited by conan7772

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Haha no I'll do that one tomorrow. I've been ignoring it. It's the 5.0 one I'm taking about. (There is a little X to hide the 4.7 one if you want)
    • So I'm going to have to keep ignoring the 4.7 update, or whatever version it is? Poop. I was hoping you'd put me out of my misery.
    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
×
×
  • Create New...