Jump to content
SAU Community

Driving My R35 In Gold Coast, Qld Last Night. R34 Pulls Up....

eastes
 Share

Recommended Posts

blueboost20 Enthusiast

blueboost20

Posted
Posted

I was driving back to Brisbane from Surfers. Looking at google maps, it looks like I need to pass through Carrara to get there. So yes, it most likely was you. Was that a roll cage? No spoiler?

no spoiler,half cage with cross bar running roof to floor,I was next to(you?) on your left at lights but we took off slowly I waited while we went passed the stadium then at the next lights nothing was happening so I took off....if this sounds familiar it could have been me, wen I was on your right you looked over and smiled I nodded as of to say 'give it a hit' but no joy so yeah I took off....If ant of the details are not right it wasn't me.....
eastes Collaborator

eastes

Posted
  • Author
Posted

Ha ha. Yep. That is definitely you. When I looked over, I was just waving to say I liked. My misses was next to me scared because she thought I was going to kill her in a drag race or something stupid. Since I only have 1 point, on good behaviour I wasn't going to dare anything anyway.

If I did, would have been interesting as your 34 sure has some balls. Have you taken it to a track or anything?

eastes Collaborator

eastes

Posted
  • Author
Posted

I absolutely could have been mistaken about the model. Not only was I distracted at the time trying to tell my missus that I wasn't going to hit the gas, I haven't had the pleasure to become too familiar many R34's or R32's unfortunately, except in computer games etc...

I have no doubt it was you now.

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

See nobody mistakes my R33 for another car...

A boat maybe, but not a car :happy:

I was going to say, might mistake it for a VN........ But THEN you said "A boat maybe, but not a car" which already summed it up

:ph34r:

BrynDETT Community Regular

BrynDETT

Posted
Posted

from a rolling start i couldnt see a skyline needing mmuch power to beat an r35 . . I came very close with 360hp in an s13 . Was only just pulling away through 2nd but smashed me on the gearchange . I reckon if i had 400 id have a good chance Haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...