Jump to content
SAU Community

Recommended Posts

I've searched the forums and saw many varying views on the different oils for the manual gearbox from a fair while ago. Just wondering what you guys think after a few km's on the gearbox oil you selected and why you think it's good or bad.

These are the 3 oils i'm looking at using:

Castrol Syntrax - 75w90

Castrol VMX80 - 75w80

Redline Lightweight - 75W140

I currently have Redline Lightweight in my gearbox. I don't think i've done enough km's for it to "wear in" as i've read in other threads that it does. I had the gearbox out and spilled some of the oil out so am not sure whether to get more redline and top it up or change it out for one of the castrol oils.

Post up your experiences!

And if anyone knows where i can get some Redline Lightweight Shockproof in Melbourne today (pref over the eastern side) that would be sweet as Oil World has sold out :)

Andrew

About 12 months ago I drained the oil (looked like the factory stuff !!) and put in VMX80.

After about a month of driving the 1-2 crunch I got when cold almost disappeared.... But now it's back again, but not as bad.

Give it another few months and I plan on draining it and replacing it with Redline Lightweight shockproof, cause by then the weather would have gotten colder and the 1-2 crunch would have got worse... :)

J

Yeah i think i'm just going to top up my Redline. The engine had to come out and they spilled some oil from the gearbox. I've hardly done any km's on that gearbox oil. Only problem is Oil World have sold out here in Melbourne so i can't get any till Tuesday!

I'm going to put Motul 4100 Turbolight in the engine too... see how that goes.

How much is redline lightweight shockproof? Is it much more expensive than the other two?

I think its almost time for me to do my gearbox and diff oil, as i dont know if they were done for compliance or not.

Cheers,

Rhett

I put the Redline in my gearbox a while back and it made a massive difference after about 750km of driving. I'm not sure how long ago that was but i'm getting crunching again so it might be due for another change.

Yeah i have a short shifter kit, but i haven't driven the car for 6 months so can't really tell you anything about it!!! Once it's back on the road i'm gonna try and clock up 1000km's in the first week. Then i'll be able to tell you about it.

Is anyone using these oils with a short-shifter kit?

LW.

Lucien;

I've got a short shifter in a 32 GTR and 1-2 shifts can be notchy sometimes, usually when shifting quickly and accelerating hard. Low speed or pausing slightly between shifts smooths it out but the latter defeats the purpose of a short shifter. Pushing the shifter firmly to the left when changing sometimes helps also. It's very smooth everywhere else which makes the 1-2 shift really annoying. Does yours do the same?

I was thinking about using some friction modifier - used to good effect in an RS Liberty for about 20k km now.

Mark

Lucien;

I've got a short shifter in a 32 GTR and 1-2 shifts can be notchy sometimes, usually when shifting quickly and accelerating hard.  Low speed or pausing slightly between shifts smooths it out but the latter defeats the purpose of a short shifter. Pushing the shifter firmly to the left when changing sometimes helps also. It's very smooth everywhere else which makes the 1-2 shift really annoying. Does yours do the same?  

I was thinking about using some friction modifier - used to good effect in an RS Liberty for about 20k km now.  

Mark

What g/box oil are you using?

LW.

Valvoline 75-85

Interesting. Reason I ask is that I was considering installing a short shifter for me R32 GT-R -- don't have one ATM -- but I want to know that using a better oil will compensate for any additional strain. With that in mind, you mentioning crunchy gears don't exactly convince me that a better g/box oil will be enough.... :(

LW.

Thanks for the link Jimbo2000... if only i'd checked the forums earlier today!!! Oh well I'll go to box hill first thing in the morning. Hopefully i'll get the car tuned tomorrow or wednesday

lwells... i had a little crunch from 1st to 2nd as well before i put in the short shifter. I then had redline installed and the crunch went away. I then put in the C's short shifter kit and there is still no crunch. I think it's just a slightly warn gearbox that will give some crunchies when cold.

when i first got my car...after i changed all fluids it started crunching REALLY bad 1st-2nd...i used the valvoline dura gear 75w85....

after a few thousand k's i changed to vmx80 and the difference was great....i still use vmx80 now and change every 10,000k's or so and its very smooth no crunching at all...esp with my C's :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...