Jump to content
SAU Community

Recommended Posts

FOR SALE "my dream car"

R34 GTR M-SPEC (rare only 228 built)

only 56,000kms

Motor only done 6,000kms since build

All work carried out by Croydon Racing Developments

Motor is the full JUN 2.7 race catalog (same set up as the JUN R32 and RH9 R34 claimed their fame with 1000+awhp)

JUN Plenum

CRD JUN race head

CRD 9litre baffled sump

Run in on HKS TO4Z

GReddy alloy radiator

GReddy drag intercooler 160 wide

Tein coin overs

OS Giken quad plate clutch

genuine Titanium exhaust

Volk Gram Light 57F Pro 19x10.5 Pro GOLD

motor is ready for big turbo set up and to go over the 1000hp I was going to 1300hp. That is if the new buyer wants more power

currently 430awkw on Shell 98oct

Motor has never had any higher boost or race fuels.

Any doubts about the car feel free to speak to the guys at Croydon to confirm genuine kms and build was no expense spared.

accident free history

Rego NSW Jan2013

Regretful sale but both toys are going, my R33 GTR V spec 'WAR33R' will be up here next when I get some pics

NO LOW BALLERS or TYRE KICKING TEST PILOTS

$98,000

Justin 0414894884

post-18902-0-97531300-1335528782_thumb.jpg

post-18902-0-46056700-1335528836_thumb.jpg

post-18902-0-23790900-1335528887_thumb.jpg

post-18902-0-29237100-1335528945_thumb.jpg

post-18902-0-71150100-1335528993_thumb.jpg

post-18902-0-98956900-1335529354_thumb.jpg

post-18902-0-92148100-1335529471_thumb.jpg

post-18902-0-88532400-1335529529_thumb.jpg

post-18902-0-24625200-1335529586_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/398787-r34-gtr-m-spec-complete-jun-set-up/
Share on other sites

Yes the 33 is still available. Although It might sell before it gets on here as theres already been a few offers....not to many cars have passed EPA & DECCW and be engineered for the the big single, front mount and airbox.

more info on the R34 GTR M-spec:

JUN 2.7L stroker kit

JUN 280deg. camshafts, retainers and valve springs

JUN oil pump

CRD 9L sump

ARP head studs

JUN main studs

competition engine bearings

Gates timing belt

Mines cam baffle plates

JUN vavle guides

Head fully race ported & polished + machined for oversized valves

ROSS harmonic balancer and pulleys

HKS TO4Z turbo kit

JUN plenum

90mm Infinity throttle body

Ferrera vaves & locks

SARD 1000cc fuel injectors

SARD fuel rail

TRUST 165 wide drag intercooler

TRUST alloy radiator

CRD spec water pump

TRUST blow off valve

OS Giken quad plate clutch

I'd say you can guess close enough the rest.....car has over $80,000 in mods alone

all with only 6000kms on them,

  • 2 weeks later...

for those that asked to separate...... $45,000 for the motor

and non refundable deposit before its removed

Car will then be returned to stock $75,000

So yes cheaper to buy as it is but up to buyer I guess

  • 2 weeks later...

Keen to part with the front seats?

Yep keen to part with front seats but only if you buy rear also. I'll sell them to you for a one off special price $98,000 and will chuck the car in with them for free......

Sex right there, ur gonna regret selling your dream car

I finally got into my 1st GTR "WAR33R" after defeating cancer. I always wanted a tuff all rounder (street, drag & track car) and could look no further then a GTR how ever I truly wanted a R34. Now I have finally full filled my dream 2 times over with my R33 NITTO build and R34 JUN build, only to now be having eye issues. This year I've already had 3 surgeries to re attach my retina try this out

and BTW your awake the whole time. Unfortunately due to this I'm not able to keep cars. Both builds where from built to handle a lot more then I have had the chance to give them but unfortunately they don't pay the bills so since I can enjoy them anymore they must sadly go.
  • 2 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...