Jump to content
SAU Community

Recommended Posts

as rob posted, it's been covered, but as i say in EVERY fuel economy thread, don't just post up how many kms you are getting before you fill up. calculate it into L/100kms otherwise it means absolutely nothing in terms of fuel economy. what you are classing as a tank full may be 20L different to what someone else is, so the actual economy you are getting will be drastically different, but the distance between fillups will be the same. if you don't put it into fuel economy terms then you won't get accurate answers.

I used to get around 10l/100km pretty easily when i used to travel on the fway alot in my skyline.

these days with a fair bit more driving closer to home and in slightly busier traffic im gettin about 11-12L/100km - still pretty decent imo, the fuel consumption doesnt bother me too much at all!

if you mean you get 350-400km out of a full tank thatd be around 15? I think we have a 60 or 65L tank.

If you're driving harder that'd prob be about right .. I'm a bit of a granny on the roads.

it's that bad?! I get 12.4 l/ 100 avg (mixed highway and street driving) from a 6L V8 lol, and i dont go easy on it. I would think you should be getting at least 500km a tank / MAX 10L / 100 on a N/A skyline.

they are a pretty highly strung engine. that's why their economy sucks donkey balls for a 2.5L engine. gearing isn't that much worse than any other small engined car. they don't have the torque to run tall gearing like bigger cube engines. if they did have tall gearing then they would be shockingly slow (in the same way that if falcodores had shorter gearing they would give mildly modded gtst's a run for their money).

more stoker kits for big block V8s than there is Jap turbo motors

From memory it was a rego/tax thing in Japan, small engine means less $$$ to register = more appealing to buyers

Quite true . . .new stroker kit out for toyota 4AGE available now

more stoker kits for big block V8s than there is Jap turbo motors

From memory it was a rego/tax thing in Japan, small engine means less $$$ to register = more appealing to buyers

they have the same thing in singapore .. most cars there have smaller engines than the same car here.

I believe lancers have a 1.6 there whereas we get a 2.0, same with alot of other cars!

haha .. amusingly HSV's cars have started to be sold in singapore!!

Prices start at 268,000 SGD for the Maloo, and up to 338,000 SGD for a Grange - and this is without COE!

COE in singapore is apparently 91,000 for a car above 1600cc .. close to 350,000 SGD for a maloo!

Road taxes of: 7,332 SGD a year!!!

**edit - had a revelation: this must be why asians love rice so much ... evolution/survival theory: in order to avoid monstrous road taxes and COE payments, we have grown to like small capacity cars .. with lots of body kits, and mods - cos labour is cheap there.

time to write my psychology thesis on this lol :banana:

Edited by Jonno34

haha .. amusingly HSV's cars have started to be sold in singapore!!

Prices start at 268,000 SGD for the Maloo, and up to 338,000 SGD for a Grange - and this is without COE!

COE in singapore is apparently 91,000 for a car above 1600cc .. close to 350,000 SGD for a maloo!

Road taxes of: 7,332 SGD a year!!!

**edit - had a revelation: this must be why asians love rice so much ... evolution/survival theory: in order to avoid monstrous road taxes and COE payments, we have grown to like small capacity cars .. with lots of body kits, and mods - cos labour is cheap there.

time to write my psychology thesis on this lol :banana:

and you are right! this is my toy back home.

418682_10150664992955795_690205794_11471190_24962840_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...