Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm looking into buying a car that I came across the other day. Seller offer me $11,500. KMS = 90000

It is a 2 door manual.

1 year rego and no rwc.

What is the normal price for a R34 GT-T year 1999?

AND

Is R34 a good car to get? What is the common problem to look out for?

Edited by R33 Gts-T Sedan
Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/
Share on other sites

I am going to take it for a full engine and turbo checked by my mechanic.

I just wanted to know, do you think a 13 year old car engine is already tired?

Is an R34 engine reliable? I don't want to keep spending money to fix faults.

Need some advice before I buy it next week.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6341965
Share on other sites

how long is a piece of string? There is SO many things that will determine wether the engine is tired or not. . .has it been thrashed?, has it been serviced regularly?has the correct fuel been used in it? you have no way of knowing this, your mechanic can test the engine and determine by the results as to the condition of the engine

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6341975
Share on other sites

btw, 90000km is a no go, pretty damn sure about that. ;)

or else it would fetch a bit more

Can you explain why 90k is a no go?

The paint, the interior and the body is actually in a very good condition. Full nismo bodykit. The spoiler looks really ugly tho.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6341985
Share on other sites

its a common thing for exchanged speedos or wound back speedos. so dont be surpised.

in a very rare case, it will be genuine. but rarely.

So dont believe the reading, see if the guy has auction papers or jap service receipts, log books etc...

that will give you a more accurate idea

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6341991
Share on other sites

skyline engines are pretty tough, the most common things that fail in the car are: turbo, afm, coilpacks and o2 sensor.

Yes I changed my coilpacks to splitfire for my R33 GTS-T 2 years ago. Not sure bout afm and o2 sensor but the fuel economy is really bad. 250 to 300kms per full tank. Turbo is in good condition as it never been trashed.

I hope that R34 has a good engine and turbo. Will find out in a few days.

So how much does it cost to replace the turbo to the same one

OR

Remove the turbo if it fails.

Rough figures so I know what to expect.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6341994
Share on other sites

So dont believe the reading, see if the guy has auction papers or jap service receipts, log books etc...

that will give you a more accurate idea

Thanks!!!! Will definitely ask for log books or anything that can prove the genuine kms.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6341997
Share on other sites

turbo is only available as a 2nd hand unit, and even then, they are getting old. find an equivalent size turbo to put on it, garrett or such.

wont be cheap, around the 1k mark for a same size turbo.

of for the same cash, get it rebuilt aka highflowed if it comes down to it. but that will create more lag. and lag is pretty bad as is on any skyline, dont want to increase it.

you can remove turbo and just get a "transfer" pipe from turbo to dump, but you will loose about 60% of your power and your car will run like shit. its never recommended to do that :D

coil packs, 400-600 depending on what your buying.

afm, round 200ish

o2 sensor is round 70 bucks

turbo dying can usually be heard, a high pitched whining is usually a give away, so is a heap of smoke coming out your exhaust under full throttle.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6342021
Share on other sites

How often will a turbo failure occur if I don't always boost it. I am a polite and average driver who does not boost if I'm not on a freeway. I will only be using the freeway mayb once a month to visit my friends. Can the turbo last 5 years? The previous owner don't often boost it as well. Engine and turbo in a good condition.

Will buy the car next week. Need to clarify this to remove any doubts that I have.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6344036
Share on other sites

How often will a turbo failure occur if I don't always boost it. I am a polite and average driver who does not boost if I'm not on a freeway. I will only be using the freeway mayb once a month to visit my friends. Can the turbo last 5 years? The previous owner don't often boost it as well. Engine and turbo in a good condition.

Will buy the car next week. Need to clarify this to remove any doubts that I have.

how long is a piece of string? you have a r33 now. the r34 isn't much different. all the same principles apply to the r34 as to the r33. did you do research on what to look for before you bought your r33? if so, just do the same with the r34.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6344167
Share on other sites

Turbo can last forever.

Your mechanic's list will include compression test, running gear, suspension, oil sludge & burning, exhaust, coolant (for oil contaminant), leaks/seepage, irregular wear and tear and rail damage, hoses/clips, rust.

Your list will include running electrics, air cond, wear on steering wheel/bolster on driver's side/carpet/key entry to barrel/pedals, worn paint of panel bolts, doors dropping on opening, paintwork, rear wheel well, rust.

We want to know if it's had a hard life so that you don't have to cop the back end of it!

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6344174
Share on other sites

I am going to take it for a full engine and turbo checked by my mechanic.

As you have said, the car has NO rwc.

the engine and turbo are probably the least of your worries. id say it will be brakes and suspension, small leaks, and gaskets that will set you back money to get the vehicle up to road worthy condition.

i will never buy a car with no RWC when the seller said they 'dont have time to get a rwc' or 'it will pass road worthy with no problems'..

a car is the second most expensive thing you will buy/sell in your life. if you cant find an hour to get a rwc on a car that has 'no problems', than BUYER BEWARE

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6344219
Share on other sites

i use the "no time" excuse because i simply don't have the time to take the car to a mechanic to get done. but i do take that into account when pricing the car as well. having said that, the cars i have sold "as is" have always then passed rwc's first time with no issues either. most of the stuff a car may fail a rwc for is easily checked yourself. as long as the tyres are good, there's no oil leaks, the brake pads are good and it drives well (no weird noises or vibrations) then there won't be much trouble with it passing a rwc. and besides, a car can be a complete lemon despite passing a rwc. they don't check actual condition of the engine, etc. just check that it is safe for the road. hence the fact that you can have a car pass a rwc that could be defected due to illegal mods.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6344307
Share on other sites

Thanks a lot guys. That was more than enough to answer my question. Car that comes with RWC does not mean anything. When I bought my R33, it comes with RWC but after I transfer the registration and take the car for a service, my mechanic told me there is an oil leak and several other problems that does not pass the RWC.

From then on I do not care bout RWC because I will rather spend $80 on a full RWC check, engine check and let my mechanic have a look at the car before I buy any car.

Link to comment
https://www.sau.com.au/forums/topic/399264-1999-r34-gt-t/#findComment-6344468
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...