Jump to content
SAU Community

Recommended Posts

So, I've had this car for almost a year and I have never noticed this, hence why I'm here.

Let's say your driving off boost. Then you push the throttle a little further until you make boost, as soon as it goes from 0psi to positive boost, there's a click, like a relay click, coming from where the boost solenoid is in the bonnet.

Has it always done that? Haha. I'm paying a lot of attention to it now... Grrr

Thanks

Link to comment
https://www.sau.com.au/forums/topic/399393-can-you-he-the-clicking/
Share on other sites

It must be quite common, had to follow my old man his pathfinder recently, when we went onto the motorway on ramp I was going to fly past him, but just before thought I felt something vibrating in the back and ended up not even keeping up with him! :action-smiley-069: haha, car's been fine since

Edited by WMDC35

yes, if you turn the ignition on you should hear it clicking as the solenoid opens and closes.

mine sounded like a playing card in bicylce spokes haha

He is right, I shat my bricks when I heard it too. Put the ignition to "on".. "click" i kept wondering for a couple of days and with some research it was the solenoid.

yes, I get that all the time haha

usually after I give the car a squirt...spend the next hour listening for broken bits lol

This is exactly the same as me

I've spent every drive since my tune listening and popping bonnet.

So much so that my bonnet cable is farked

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...