Jump to content
SAU Community

Recommended Posts

All parts are from a series 2 97 r33 gts manual. Had a impact in the front but fixable with a dressed front cut. It is fixable but I have decided to strip it. Just ask if you need something not listed. I will post most items. If its bigger I may get you to source your own courier. I can find at least one day a week I can meet a courier.

Also if you need something and the price is honestly a bit steep don't be afraid to have a chat to me about it. That doesn't mean I want to be low balled on everything but id like to think im fair and reasonable. If you disagree however please don't comment on that lol. If you would like pics please let me know. Il try and get pics tonight of the non standard gear.

Manual Conversion

Series 2 sunroof shell. Currently rolling with manual conversion installed. 3k Can be negotiated as to how much i remove or keep there. on repariable write off register

Full series 2 interior

Front seats

rear seats

COMPUTER $100

TAIL SHAFT $200

R200 WITH CRADLE DIFF IN VGC $250 ABS diff

Abs pump

DRIVESHAFTS $65 EACH

HICAS $80

POWER STEERING RACK $150

POWER STEERING BOTTLE $20

BRAKE MASTER CYLINDER $150

SWAY BARS $20 EACH

Horn $20

Front wiper motor - $50

Rear Wiper Motor - $50

STEERING COLUMN $50

(Body parts)

series 2 headligtht Passenger side 175

Passenger front guard $50 very slight mark

Drivers door 300

Pass door $300 includes glass window reg and everything

Boot very minor damage to rear drivers side lip. $60 no wing

Rear tail lights

(DASH PARTS)

turbo cluster with 167000km's $150

DASH NO CRACKS OR BUBLES OR HOLESLOOKS LIKE NEW with airbag $300

ALL VENTS $75

GLOVE BOX $30

CENTRE CONSOLE $150

CLIMATE CONTROL UNIT $75 BOTH BUTTONS WORK

HEATER CORE $70 A

IRCON CORE $70

HEATER FAN $20

(INTERIOR)

INDICATOR / WIPER SWICH Headlight, fog lights / ASSEMBLY $100

HANDBRAKE $30

REAR TRIMS $30 EACH

SEAT BELTS SET $150

INTERIOR LIGHT $15

PLUSH CARPET $70

PASSENGER DOOR TRIM $75

POWER WINDOW SWITCH PASS SIDE $25

BOOT TRIMS $70

POWER ANTENNA $50

PILLER TRIMS $20 EA

ROOF LINING $40

KICK PANELS $10 EACH

R33 GTST. Skuff plates, both sides $35

Rear Seats - $100

Door seals $25 each

Boot seal $25

Rear ¼ trims - $50 each

Rear1/4 window surrounds $50 each

A pillar Trims $20 each

B pillar trims

Door cards

Rear Vision Mirror $20

(ODDS AND ENDS)

FUEL TANK $30

FUEL PUMP $50

WASHER BOTTLE $20

RADIATOR OVERFLOW BOTTLE $20

WINDSCREEN $200

QUARTER GLASS $30

REAR WINDOW $200

BATTERY HOLDER $20

WIPERS $15

FUEL LINES $50

FUEL FLAP $10

FUEL CAP $10

Engine Mounts - $80

Radiator overflow bottle - $20

Stock BOV - $40

Sun visors $30

Handbrake assembly & cables - $160

Sing out if you need anything not listed. PM me or get me on 0424506009

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Hum. no idea what your building there. there would be a few more variables like what type of car its going in for the leingth. iv never tried ether so im not sure sorry mate.

i honestly cant answer that having never done it before. could you possibly ring a local wrecker or import car workshop? or maybe have a search around here? id hate to give you the wrong info. Im also not splitting teh tailshaft from teh manual conversion yet.

Sure do.

i also have an aftermarket wing thats slightly bigger than the series 2 wing. looks really cool. il get some pics of it. Also have a front strut bar. Heaps of other stock bits i havent actually listed. Will try and list them individually but sing out if u need anything.

Have you got the driver side plastic bit for the electronic windows ? Also the plastic bit that fits around the inside of the driver side door where the open handle is.

Where are you located?

Edited by DarkRyda

Hey mate. Im on the Gold Coast. the plastic holder for the window switch is cracked at the base around where the door handle cup is. You probably dotn want it then?

il have a look for the handle bit you want later when i get home.

hi mate,

i am after driver side window door rubber seal which runs along the door.its like thick rubber...someone tried to pinch my car so they cut the rubber to unlock the door from the top.

thanks

Hey mate, chasing 950 for the whole manual conversion. it is a na box but im told they are still good for a mildly modded turbo car if thats what you have.

Others iv sent pm's to. Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...