Jump to content
SAU Community

Recommended Posts

I need Screw-type Centre Caps for LMGT4 GT500 rims please?

Reward is offered for such a set to screw into those rims. The hexagonal spanner would be a real bonus!

If you fancy yourself to be a top Bounty Hunter and bring these in to me, I will be very grateful!

Oh, did I say that I'd pay you too? But not the whole posse!

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/400342-reward-dead-or-alive-centre-caps/
Share on other sites

DId some searching for you this morning and found this - http://www.nengun.com/rays/nismo-lm-gt4

It does say in there that the wheels have been discontinued however limited quantities are still available and to email them for availability.

So, maybe they still have some centre caps laying around? You never know, could get lucky.

Few more styles available - http://www.nengun.co...gt4-center-caps

Seems in the last two links that they are readily available.

Hope this helps mate. As your car is literally in mint condition - it does deserve brand new ones.

Edit: Apologies for the triple post.

Edited by iwanta34gtr

Hey Terry,sorry to jump in your thread ,but i need some buddy club p1 centre caps.So instead of starting a new thread i thought i would ask here.Hope you don't mind .Genelle. :action-smiley-069:

You do realise don't you Genelle that if you were to start your own thread about Buddy Club P1 Centre Caps, you as a girl will attract many more "Views" that this old codger?

Your thread can go like this...

"Genelle Needs Buddy"

Post #1 > Buddy Club P1 Centre Caps needed desperately by frustrated woman Genelle...

lol

iwanta34gtr, they aren't the ones Terry is after.

Terry, this is from my collection :) So you can see what parts you need, its not simply the centre caps.

e3b9b24b.jpg

71fa8f83.jpg

332d90df.jpg

IMG_0148.jpg

b73e1966.jpg

Genelle!

If you can get these ^ ^ ^ for me, I'll get you a set of Buddy P1 Caps for free! :)

  • 3 weeks later...

If they look the same, fit the same, smell the same > I'll grab 'em PLYNX. Are you in Sydney area for a test fit?

Or...

Pics please to [email protected]

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...