Jump to content
SAU Community

Our New Dr30. Our Old Prince Skyline Gt

clubracer
 Share

Recommended Posts

clubracer Community Regular

clubracer

Posted
Posted

Hey guys,

Thought I should drop by and say hi. I have been meaning to for a while but I was waiting for the new ride to be confirmed.

My brother and I have just bought ourselves a DR30 Skyline RSX with the sole intention of racing it and using it as a tool to promote my little online motorsport business AUTOsports Australia.

Some of you might know this car already so if there is anyone that can give us any information on it that would be greatly apppreciated. As we have also never modified one of these any advice woulld be greatly appreciated. We are planning to run the car in Improved Production because we really want to be competitive and keep the car as close the Group A looking as we can! Maybe one day when we have money to blow we'll go and do something crazy in Time Attack with a different car...

On a different note we also have a Prince Skyline GT (my fathers) that is built for group Nb historics. New engine has been a nightmare so hasn't been on track for a number of years but should hopefullly see the track again in 2012.

Back to the DR30. We're going to source S13 uprights and front hubs, plus LCA's so we can run lots of camber and then also run S13 spec coilovers (which I have read about on here) and front brakes although will probably have to get some custom rear brakes done. Any thoughts on this?

ANyway enjoy the pics. Will get more up here soon.

Cheers

post-93639-0-01598500-1337387694_thumb.jpg

post-93639-0-14197000-1337387800_thumb.jpg

post-93639-0-61207700-1337387879_thumb.jpg

post-93639-0-58837100-1337388016_thumb.jpg

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

clubracer
clubracer

Yeah I know people will either love it or hate it, but at the end of the day I need to promote the business, and I want to do it with something that is a bit different that will stand out from the cro

clubracer
clubracer
clubracer
clubracer

Posted Images

prince_skyline Community Regular

prince_skyline

Posted
Posted

Welcome Peter...

Can't wait to see the car (Prince GT) out on the track. We (The Register :action-smiley-069: ) are all very much looking forward to it.

Beechworth was such a long time ago although we did catch up with your folks at Lithgow.

Congrats on the DR30 also. Probably going to be my next car as well - such a great car.

Will look forward to the build updates with the DR...

Cheers

Jason

Ross Collaborator

Ross

Posted
Posted

Think old mates getting confused by tbe dry sump one getting around queensland. Similar color but different car.

This is my old built DR that is now back in Qld that the other poster may be referring too.

stuff057xb5.jpg

  • 4 weeks later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Hey guys,

Well I got the interior stripped out and sold and hoping this weekend will get some dry ice in there to help get the sound deadener out. Still tossing up about the cage... looks like I'll be going steel though. Have spoken to Bonds about getting a kit to weld in myself although not sure yet. Been a little while since I rigged anything but might just do a bit of practice before jump onto anything serious like a roll cage. The price difference is huge, but then again the hours spent installing one will probably have me change my mind at the end of it all! Can't believe how much stuff came out of the interior though, and the amount of 80s heavy electronics and boxes... still more to come but the bulk of it is gone.

Check out more of the build at http://autosports.com.au/index.php/news-a-projects/17-project-dr30

dr30-6.jpg

dr30-5.jpg

  • 2 months later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Okay so it's been a while so time for some updates. Work has been crazy and I've been concentrating on building the biz rather than the car but we've completely stripped out the sound deadener using dry ice and a timber mallet. The bets move even. The stuff literally shatters. All up for 16kg out of the passenger compartment and boot. Have spoken to some guys regarding a basic 6 point bolt in cage which should be the next step. With a bit of luck next month will see the cage, race seat, steering wheel, etc all done, so the inside will be pretty much ready to go. Have also lined up wheel, brakes and suspension so hopefully by the end of the year we'll get an initial test session in.

post-93639-0-42862900-1347608834_thumb.jpg

post-93639-0-80138700-1347608855_thumb.jpg

  • 3 weeks later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

It's been a while since I have worked on the car but we're coming up to some nice updates. I spoke to the guys at AGI Precision Engineering and without a doubt these guys will be building the cage. Not only are they really well priced but the level of professionalism is second to none. It's a nice change to see such a spotless workshop - The guy was an engineer/mechanic at Williams F1 so would sort of expect it. Anyway it will be a nice 6 point weld in cage with hopefully a few extra features to add a bit more rigidity. If you want a cage tell them Peter from AUTOsports sent you! They also do a huge range of bolt in half and full cages fully CAMS compliant. Anyway, enough of that.

So the car should be going in there in about a fortnight and then after that the fun can start. The cage is the main part I couldn't do so as soon as it's back it will be full steam ahead.

Picked up these little AP beauties. Was originally going to run with the D2 calipers I had but they don't quite clear the wheels I want to run. By the way the D2 6 spot calipers are for sale. $400 no offers.

ap-caliper.jpg

d2-brakes.jpg

  • 5 weeks later...
clubracer Community Regular

clubracer

Posted
  • Author
Posted

Hey guys thought I'd post this in here.

Have the following for sale:

1. Complete wiring harness - $100 - Great condition

2. Standard FJ20ET computer - $100

3. Fully working air conditioning (degassed) - $100

4. Standard suspension struts - $80

5. Front brakes (discs and callipers) - $50

Before work commences on the cage we'll be fully rewiring the car and stripping at least another 30kg in wiring out and having a Adaptronic computer installed (which will also mean removing a lot of the pollution gear - another 5kg). All up I think we've removed in the region of 100kg out of the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...