Jump to content
SAU Community

Recommended Posts

  • 5 weeks later...
  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

So after installing the boost controller it was time to test it out on the dyno.

sorry the pics are a bit shity but here we go.

We tryed 3 diferent settings,(stock turbo is f**ked) 7psi,9psi and 10.5psi droping off to around 9 leaving it at 170kw.

Sadly it was pig rich,stupid stock ecu, so theres an easy 10-15kwto be had if it was runing around 12.5:1

but ended up with a 14% gain overall.

IMG_0286.jpg

KW and Torque

IMG_0290.jpg

KW and boost

IMG_0288.jpg

IMG_0289.jpg

Torque and boost

IMG_0287.jpg

Since we have turned the boost up on the R34 it was time for a front mount intercooler

IMG_0294.jpg

I was pretty surprised how much bigger the GTT intercooler is compared to an R33 one

IMG_0291.jpg

IMG_0292.jpg

Delta fin 8-) tested on of these coolers on my mates rb25 s13 on the dyno against another type of intercooler and it really performed well,

much lower intake temps.

IMG_0295.jpg

IMG_0296.jpg

IMG_0298.jpg

will probly finish it on tuesday

Hmmm i started having a problem with the r32 idleing really high, and it seemed like the throttlebody's were not fully closing.

After checking everything that could be affecting the last thing to do was remove the intake manifold,and im glad i did....

Pulling the plenum away from the throttle bodys i strait away saw the peice of tissue paper caught around one of the throttlebodys,dope au

DSCF1745.jpg

So i thought f**k while this shits off i might aswell do as much as i can so i decided to get rid of evrey single water line, heater hoses and all,everythings gone, getting rid of some realy shit hoses andd a million possible leak points

DSCF1741.jpg

And i also gave the plenum a blasting while its off to

DSCF1743.jpg

As soon as i get some ball joints and swaybar bushes this will be going in the laurel

DSCF1746.jpg

DSCF1747.jpg

Thanks DJRIFT, yea its definantly a problem, my tuner had a considerable voltage drop in his 32 GTR through shitty old loom,

So he wasnt going to tune mine until i had done it haha.

:thumbsup: Cheer's Samos69, haha yea well my mate had a GTS-t the same year and the rego just said "skyline coupe" so we threw the rego and plates on

the GTR, i drove it all the way from Auckland to New plymouth :sweat: 260km runs on the motorway

Trying to build a responsive 20 :P

DSCF1801.jpg

DSCF1808.jpg

DSCF1806.jpg

DSCF1807.jpg

DSCF1799.jpg

DSCF1798.jpg

DSCF1797.jpg

Its a Garrett copy T28, watercooled, 360* thrust bearing and .64 rear, should be good for the rb20, even a shity t3t4 makes 20's pretty damn laggy, so this shud be good.

Yea its a t3-t2 adaptor and im going to have the wastegate venting from it, much easier than moding the manifold, and it means i get

to keep the heat sheild ;)

I saw a picture of a cef a little while ago with one, and that was runing a huge turbo to, so im hoping it will fit fine in the laurel (finger's crossed)

Just palnning on runing it on around 13-14psi runing a mines chiped ecu, would be happy if it made 160-170kw,injectors would be maxed tho.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...