Jump to content
SAU Community

Recommended Posts

  • 5 weeks later...
  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

So after installing the boost controller it was time to test it out on the dyno.

sorry the pics are a bit shity but here we go.

We tryed 3 diferent settings,(stock turbo is f**ked) 7psi,9psi and 10.5psi droping off to around 9 leaving it at 170kw.

Sadly it was pig rich,stupid stock ecu, so theres an easy 10-15kwto be had if it was runing around 12.5:1

but ended up with a 14% gain overall.

IMG_0286.jpg

KW and Torque

IMG_0290.jpg

KW and boost

IMG_0288.jpg

IMG_0289.jpg

Torque and boost

IMG_0287.jpg

Since we have turned the boost up on the R34 it was time for a front mount intercooler

IMG_0294.jpg

I was pretty surprised how much bigger the GTT intercooler is compared to an R33 one

IMG_0291.jpg

IMG_0292.jpg

Delta fin 8-) tested on of these coolers on my mates rb25 s13 on the dyno against another type of intercooler and it really performed well,

much lower intake temps.

IMG_0295.jpg

IMG_0296.jpg

IMG_0298.jpg

will probly finish it on tuesday

Hmmm i started having a problem with the r32 idleing really high, and it seemed like the throttlebody's were not fully closing.

After checking everything that could be affecting the last thing to do was remove the intake manifold,and im glad i did....

Pulling the plenum away from the throttle bodys i strait away saw the peice of tissue paper caught around one of the throttlebodys,dope au

DSCF1745.jpg

So i thought f**k while this shits off i might aswell do as much as i can so i decided to get rid of evrey single water line, heater hoses and all,everythings gone, getting rid of some realy shit hoses andd a million possible leak points

DSCF1741.jpg

And i also gave the plenum a blasting while its off to

DSCF1743.jpg

As soon as i get some ball joints and swaybar bushes this will be going in the laurel

DSCF1746.jpg

DSCF1747.jpg

Thanks DJRIFT, yea its definantly a problem, my tuner had a considerable voltage drop in his 32 GTR through shitty old loom,

So he wasnt going to tune mine until i had done it haha.

:thumbsup: Cheer's Samos69, haha yea well my mate had a GTS-t the same year and the rego just said "skyline coupe" so we threw the rego and plates on

the GTR, i drove it all the way from Auckland to New plymouth :sweat: 260km runs on the motorway

Trying to build a responsive 20 :P

DSCF1801.jpg

DSCF1808.jpg

DSCF1806.jpg

DSCF1807.jpg

DSCF1799.jpg

DSCF1798.jpg

DSCF1797.jpg

Its a Garrett copy T28, watercooled, 360* thrust bearing and .64 rear, should be good for the rb20, even a shity t3t4 makes 20's pretty damn laggy, so this shud be good.

Yea its a t3-t2 adaptor and im going to have the wastegate venting from it, much easier than moding the manifold, and it means i get

to keep the heat sheild ;)

I saw a picture of a cef a little while ago with one, and that was runing a huge turbo to, so im hoping it will fit fine in the laurel (finger's crossed)

Just palnning on runing it on around 13-14psi runing a mines chiped ecu, would be happy if it made 160-170kw,injectors would be maxed tho.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...