Jump to content
SAU Community

Recommended Posts

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Now that the exhuast is all finished i think ill had a few more mount's to it, aswel as heatwrap the dump pipe and the rear section of the exhuast around the fuel tank.

Im thinking about painitng my intake manifold with some black wrinkle paint

Having just 2 vband clmaps for the exhuast makes removal so easy

DSCN0061.jpg

DSCN0062.jpg

DSCN0058.jpg

DSCN0059.jpg

DSCN0060.jpg

DSCN0064.jpg

DSCN0063.jpg

DSCN0065.jpg

DSCN0057.jpg

DSCN0066.jpg

DSCN0056.jpg

Edited by NZDRIFTER

I'v also bought & fitted the extra accessory loom from link, making it so simple to wire in a switch for duel maps, electric fans etc all controlled via the link.

DSCN0085.jpg

Loving this exhuast, just wana see the car on the ground :)

DSCN0087.jpg

DSCN0092.jpg

DSCN0104.jpg

DSCN0102.jpg

And for the laurel i have an HKS oil cooler kit to go with the HKS intercooler kit.

DSCN0116.jpg

The old mans in the middle of susing a Nistune for the 34

DSCN0097.jpg

DSCN0098.jpg

DSCN0056.jpg

Also my mate phills super clean R32

295191_10151047400526295_801968838_n.jpg

  • 2 weeks later...

The subframe is almost ready to go back into the laurel, im just waiting on a few parts, then ill start putting in the new engine.

dewKo.jpg

2m6Bp.jpg

This should do for the final exhuast mount

4OjjQ.jpg

tiLpV.jpg

It's all a very snug fit

SM3qf.jpg

wfjaL.jpg

Im thinking about just leaving my plenum as the sand blasted look for now, paint will just get ruined when re-fitting.

FyAx6.jpg

Cut my wheel studs down so now i can run a 20mm spacer with my drift teks

I0iP7.jpg

Xxx0h.jpg

zlMpB.jpg

HGz2X.jpg

  • 3 weeks later...

I finally sussed some decent gaskets for the 26's throttlebody's

ZETCe.jpg

And some camber arms for the laurel so i was able to complete the subframe and fit it back under the car and start removing the single banger ;)

5dQlJ.jpg

GTXOi.jpg

BAwpP.jpg

  • 2 months later...

So i finally got the engine back together a few weeks ago.

DSCN0556-1.jpg

DSCN0554.jpg

DSCN0557.jpg

You can never have to many RBs ;)

DSCN0569.jpg

DSCN0570.jpg

And finally got her back on the ground

DSCN0571.jpg

DSCN0580.jpg

DSCN0576.jpg

Xmas present from the misus

DSCF2004_zps108249c7.jpg

DSCF2019_zps3cbd2d77.jpg

DSCF2013_zps99cc162a.jpg

Iv been talking to my tuner and i should be able to take it out to him in the next couple weeks, so iv fitted some 18s to help it clear everything on the dyno

DSCN0590.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...