Jump to content
SAU Community

R34 Gtr Double Din Conversion Kit - Part Numbers?

iwanta34gtr

By iwanta34gtr,
in Car Audio & Electrical

 Share

Recommended Posts

kylieyeah Community Regular

kylieyeah

Posted
Posted

The photo I posted is one with ambient temp.

You could change the face plate, but is it easy to find?

The climate control unit is only $150 and it's plug and play so I just thought itd be the best and easiest method.

  • 1 month later...
iwanta34gtr Grand Master

iwanta34gtr

Posted
  • Author
Posted

Hi everyone,

Have just finished sourcing all of the required parts for this conversion.

For future reference, if anybody has the same factory GTR NAVI unit as mine - for clarification, the side brackets are definately different and you need to also source the double din brackets.

If anybody is actually interested in a full kit - PM me as I have one with everything you need which I am thinking of selling - Brackets, brand new genuine nissan double din facia / surround, air con unit with brand new genuine nissan replacement front face. The whole kit literally looks brand new.

I'm still tossing up whether to put it in my car or not.

Cheers.

  • 3 months later...
  • 1 month later...
Hokes Apprentice

Hokes

Posted
Posted

Its already double din iso ( tiny bit off double din todays standard but not much to worry about )

No kit needed but some trim rings wont fit right without filing the trim ring slightly or some dont need trim ring mounted , only slot the existing holes in the cage holding the radio to set it back a bit further to make it look perfect

Note tape a thick soft towel around the console / gear surround to set the razor sharp cage on or it farks the surround black bits and its near impossible to repair ,

Double din rules fark the single din look is boring

made this mistake doing my double din conversion drunk, was too over excited when it finally got delivered now scratches everywhere :( will probably get it repolstered

  • 2 weeks later...
  • 5 years later...
Sean S Rookie

Sean S

Posted
Posted

I would be interested in purchasing any of the mentioned parts including the 2 DIN brackets and the facia and the new faceplate for the ambient control version of the heater control.  My gtr has the sat nav aswell and I'd like to convert to the 2DIN setup.

Thanks! 

Sean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • Piggaz
      Jacks that fit under GTR lips that can reach the subframe?

      By Piggaz · Posted

      http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • f00stx
      Intro/R33 owner

      By f00stx · Posted

      Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • f00stx
      Second time Skyline owner (R33 GTS-T and now a V36 370GT)

      By f00stx · Posted

      Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...