Jump to content
SAU Community

Recommended Posts

No i didnt get the paperwork from Japan, i know when the car was imported and by who it was brought in in 2009 buy autostyle performance in sydney, bought buy a guy in his 20s from QLD then sold to the guy in TAS in the space of 6 months of it getting into AUS. Tried to contact auto style about it, apparently they changed owners so they didnt have the details from the cars previously brought in.

Im not to fussed buy it, i had a limited amout of time to find one as i needed a car since i sold my last one, it passed all the mechanical checkes and a miss aligned panel does not rly fase me that much i can just take it to one of the shops in syd and have them take it off and align it properly. and for the price i paid im happy with it.

Yeah, it wouldn't be anything major to worry about, only a minor issue. Plenty of cars come over from Japan with a lot more than just one misaligned panel..

A panel shop would be able to align it properly....if you decide to go through with it I can recommend you a panel shop that I can vouch for and know does great quality work (and won't rip you off).

+1, this forum rly needs a dam like button :woot:

And a dislike button!

I cant remember which forum had that but it failed epically lol Might have been hardtuned back in the day.....

If they had a dislike button Benjis accident damage speel would probably crash the server with dislikes............. Maybe add a STFU button to save us typing so much?

If its the one with the stud and you have no other tools try getting the socket on the nut with no extension or ratchet and go from there..............

Yea got some spanners, but none the right size unfortunately! And yea tried without the extension, couldn't get enough force onit to budge it. Jarrads bringing me some tools haha

Yeah, it wouldn't be anything major to worry about.

A panel shop would be able to align it properly....if you decide to go through with it I can recommend you a panel shop that I can vouch for and know does great quality work...just PM me.

Anyway, plenty of cars come over from Japan with a lot more than just one misaligned panel.

Yeh once i get the engine all sorted and a set of rims, the current rims are apparently GTR NUR spec NT03-M in white and when i had the rear tyres changed found out 1 rim was buckled -_- just an excuse for me to get a set of TE37's or GT-C :yes: after that if all is well with her then ill see about the panel.

Yea got some spanners, but none the right size unfortunately! And yea tried without the extension, could get enough force onit to budge it. Jarrads bringing me some tools haha

Oh shit! Say goodbye to your GTR.............

Yeh once i get the engine all sorted and a set of rims, the current rims are apparently GTR NUR spec NT03-M in white and when i had the rear tyres changed found out 1 rim was buckled -_- just an excuse for me to get a set of TE37's or GT-C :yes: after that if all is well with her then ill see about the panel.

Cant repair the rim?

Haha he's not staying to help... But I'm far worse than he is haha

Oh god! haha........... Post on here or call me if you have any dramas........... Im here until 5, IF you are stuck just let me know and ill head over after work and give you a hand :)

I'm not very happy with the paint on my car...it's all original but it's in pretty meh condition.

Also I've noticed a small crease just about the wheel arch which is causing a sort of swirl effect....sooo

In all honesty once I get the money I'd like a full respray...

Just need to get the VIN number of a MNPIII R34 GTR and buy the paint from Nissan....might have to bribe someone who owns a MNPIII R34 (you need to own a MNPIII R34 GTR to be able to buy the paint from Nissan)...

ORRR, i wouldnt mind this blue colour

01_37.jpg

well i dont have any other rim to put on the car when it gets fixed, and long story short, needs more poke for street cred + track set with slicks.

Oh you one of these "Poke" people eh? You and Chookie will got on well :no:

I am form over function, Chookie is....................................... Well a clown :laugh:

haha all good though, ill take the piss outta ya for BOV's etc but everyone has their own taste, In this Newy/Coast section we all get along well (Benji drives us mad but what do ya do).............

Benji you cant afford to do anything on your car for now while you are studying so PLEASE dont put up all your build crap in here as we know its not going to happen, put it in your epic build thread and we will come look!

Oh god! haha........... Post on here or call me if you have any dramas........... Im here until 5, IF you are stuck just let me know and ill head over after work and give you a hand :)

Appreciate it mate, and will do. Should be right, seems I only need to remove that one other bolt, then move the bracket and unscrew. Should be able to tackle it haha...

All good, just make sure you post the pic as i wanna seeeeeeeeeeeee :woot:

Yea will do mate, I was hoping to get a pic off to the guys at JEM before 5..... It's looking doubtful now though

Benji you cant afford to do anything on your car for now while you are studying so PLEASE dont put up all your build crap in here as we know its not going to happen, put it in your epic build thread and we will come look!

Lol...a man can have dreams!

33 days till I get my full licence.

Also got the shits with uni assignments, as some lecturers use the "problem based learning" style of the course as an excuse to provide these vague, indirect answers to questions.

Contract Admin Assignment 1 + 2 = 32,000 words total (good lecturer who is very helpful, but I am a wizard at this subject). COMPLETE

Fire Safety = Assign 1 7500 words + X (2nd assignment Im having trouble with) + Assign 3 2000 words = 9500 words + X

Infrastructure Development = done 2 quizzes (structural eng + geotech), but havent started the infrastructure report which I expect to be 20,000 words. But lecturer refuses to help anyone with the vague assignment brief which can be interpreted many ways.

MacroEconomics = Elective subject which I am pwning.

Workload is absolutely ridiculous and I basically have no social life or Vitamin D atm.

Havent seen sunlight in days.

Fire is due oct.25th and Infrastructure is due nov.2nd

Yea will do mate, I was hoping to get a pic off to the guys at JEM before 5..... It's looking doubtful now though

They are there to 5.30 a lot i think man! So keep at it ;)

Yeh i think mine may have been in a prang in japan b4 it was brought over, front drivers fender seems a little bit off, i didnt notice it when i went to inspect/pick it up from TAS, emotions got the better of me i was awed by the presence of a GTR i was about to buy . Passed mechanical inspection and turbos where checked for freeplay so all was good on that end.

I done the exact same thing. I did look at another 2 shitter GTR's before i bought mine though just to make sure. A small prang is nothing to worry about as long as there's no chaisis damage.

Yesturday i found out mine is a cold weather spec r34 gtr - rare packge, but means it definatly spent some time on salted roads.

:domokun:

:domokun:

Yeah, the panel gaps for R34's are usually spot on and to within a pooftenth of a millimetre.

Unequal panel gaps usually does indicate there is some underlying accident damage. Check the bolts of the panel and if they have been repainted then it means the panel has been taken off before.

r34's are not spot on....look where the rear lights meet the boot. Lexus has good panel gaps...nissans not so much

I'm not very happy with the paint on my car...it's all original but it's in pretty meh condition.

Also I've noticed a small crease just about the wheel arch which is causing a sort of swirl effect....sooo

In all honesty once I get the money I'd like a full respray...

Just need to get the VIN number of a MNPIII R34 GTR and buy the paint from Nissan....might have to bribe someone who owns a MNPIII R34 (you need to own a MNPIII R34 GTR to be able to buy the paint from Nissan)...

ORRR, i wouldnt mind this blue colour

Plenty of MP3 vins in the nissan fast section... just requires a bit of searching

Edited by wedge_r34gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...