Jump to content
SAU Community

Recommended Posts

Thanks man, appreciate it!!!!

Benji real cars fit Pads and Rotors..... Wtf is a hardware kit? Are you fitting a bench vice to your control arm?

The shims and clips things are the hardware kit...

Heres a hardware kit for S13.

FRSport_240SXBrakeKit_512422538844a0b4a3c5cddb.jpg

Once funds permit, I'm going to be ordering a vented carbon fibre bonnet from japan

tumblr_m92mcy3ULe1rohi97o1_1280.jpg

Not really in a hurry for rims as Ive got a pretty much fresh set of KU36's on that set of rims atm.

And coilovers etc are going in in January. From where its at, only needs to be lowered 10mm in the rear and then the control arms will be parallel all round. So I dont negatively affect handling, I'd need to spend more money on things like roll center adjustors if I decided to go any lower than that.

yep - welcome to the joys of gtr ownership.

nice price on the 9's - thats basically what i paid for my -5's (which are usually a few hundred cheaper)

Edited by wedge_r34gtr

Come over to WA and keep me company :-)

What is the work situation like over there?

Could realllly consider it in the new year.

As for car stuff I saw Paul today and got the motor back on track. Also picked up a nice shiny catch can/washer bottle

Mjh, I washed my car today and just polished it afterwards....

do you have any tips on detailing?

Best thing you can get for detailing is a Concours 900 RO kit.

Car looks good as is just get a good sealer and wax to help protect the finish. Check the detailing thread and also check out the Waxit site for quality waxes etc

What is the work situation like over there?

Could realllly consider it in the new year.

As for car stuff I saw Paul today and got the motor back on track. Also picked up a nice shiny catch can/washer bottle

Work's pretty plentifuly, lowest unemployment rate in the country.

i know that catch can, its really shinny :-)

Did you get a water pump? Paul kept hold of my spare N1....

Edited by wedge_r34gtr

Work's pretty plentifuly, lowest unemployment rate in the country.

i know that catch can, its really shinny :-)

Did you get a water pump? Paul kept hold of my spare N1....

Yeah just went with a VL pump.

N1 pumps are more for higher revving motors aren't they? EG drags tracks etc

I'm giving some serious thought to a different job.

The one I have now is good but not enough work or pay

Some guys manage to do 12 hour days regardless of how busy or quite it is an I seem to get the easy short run most days

http://www.gumtree.com.au/s-ad/hoxton-park/cars/nissan-skyline-gtr-must-see-goin-cheap-1995-model/1009072657

14k maybe less could be mine this weekend.

thoughts, fears, loan??? haha

I could very well be wrong but don't GTR's have a BNR prefix for the chassis number?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So like the title says my 97 rs4v has a oil temp sensor but no triple gauges as it was originally factory navigation. My current setup is not using the factory oil pressure sensor as I'm running a link ecu and a real sensor.  I did leave the oil temp sensor in. So now as I was working on first start up and bleeding coolant I get the oil light on the dash faintly as the oil temp gets to about 60-70c. Oil pressure is 45psi at idle at the same time.  I'm wondering if the temp sender doing this?  
    • Well it runs again!  This was a definite case of while I have it apart lol Everything except the body and interior has been restored, refinished, or replaced.  @socal_stagea is my IG if you're bored and want to see all the pics.
    • I already got plug and play Link ecu G4X. Main concern is that the de loom works on s1 motor or not? I already rewired injector and coils loom to suit my bosch injectors and bosch vag coil. I’m not running any Iacv. For cas running the nz wiring kit i bought the neo plug one so it suits the wiring but don’t know it works or it doesn’t matter they work the same on every motor. For wastegate solenoid do i need to wire straight from ecu? What can i do for iat sensor to work or same run from ecu? For Vct solenoid, right now i got s1 vct solenoid on motor so do i need to remove neo connector and add s1 connector to work? Any other thing i missed i need to do to make the motor working on de loom. Any different mechanism on neo vs s1?
    • Yes I was planning to get it to a tuner with a dyno, but they told me to wait till September because the heat really started now and it is not ideal to do it in this heat.
    • Next week man, no rush on the postage 
×
×
  • Create New...