Jump to content
SAU Community

Recommended Posts

Ruxis,

Its had a hit in the rear end from what I can see...(panel gaps are dodgy/arent factory)....paint seems off in colour on the boot pic and has a lot of orange peal...wouldnt be suprised if whole car has had respray

Best way to tell of rear end damage is look in the boot and check for the factory seam sealer (where the floor pan connects to the beaver panel).

Only way to tell 100% is inspect in person, but it looks dodgy.

As for the chassis code, well its not a GTR chassis code so its most likely been rebirthed.

Most examples of 33 gtr's for sale in Australia atm look pretty tired in my opinion....

Better off getting something nice from Japan and paying a little bit extra (You can fetch an R33 for a good price from Auction, dealer is always a bit more expensive)...

Anyway, there is currently a Grade 4.5 Midnight Purple R33 GTR going through auction in Japan (today)

http://www.j-spec.co...NE-3385259.html

I say you could snap that up for 22k landed and complied....

From a dealership (youll always pay more)

Immaculate Dark Grey R33 GTR for 30k landed and complied

http://www.j-spec.co...ne-6973360.html

Auto Select Tuned R33 GTR with Single Turbo for 32k landed and complied

http://www.j-spec.co...ne-7077060.html

Your looking at photos dude :S

Defo not paying 30k for a f**kin 33 gtr. I've been looking and there's some that look really nice for 20k(keep in mind I don't give a f**k about panels 1mm off that i can see in a photo from 10 metred away etc)

Your looking at photos dude :S

Defo not paying 30k for a f**kin 33 gtr. I've been looking and there's some that look really nice for 20k(keep in mind I don't give a f**k about panels 1mm off that i can see in a photo from 10 metred away etc)

Ahhh okay, yep.

This one may be worth looking at Ruxis, looks pretty tidy

Could bargain with him and shave a few grand off the price...

Plus its Series III

http://www.carsales.com.au/private/details/nissan-skyline-1997-13675469?base=1216&vertical=Car&cr=3&eapi=2&__N=1246+1247+1252+1282+1216&find=r33 gtr|CarAll&silo=Stock&num=15&sort=default

particular part i need to replace on my car:

Ex Nissan Australia - $272.40

Ex Nissan Japan - $112.60

Ex Nissan UAE - $59.52

I do believe we are getting ripped off in Oz. :domokun: :domokun:

Edited by wedge_r34gtr

particular part i need to replace on my car:

Ex Nissan Australia - $272.40

Ex Nissan Japan - $112.60

Ex Nissan UAE - $59.52

I do believe we are getting ripped off in Oz. :domokun: :domokun:

We get ripped off badly in Australia...

Which is why I have gotten most of my parts for my S15 from Japan from the contact I have over there, and saved a lot of money in the process.

Nismo smoked inidicators have been installed.

Also, RDA slotted/dimpled rotors + EBC greenstuff + hardware kits have been installed.

Pictures coming tomorrow.

Hey benji,arn't you at the nats?

I will be spectating, won't be participating.

my dad entered the track day today :D

there were 4 spots left and they would only let you enter if you entered all 3 events but i got my beg on and they gave him an entry today :D:D:D

Since when did 4 spots become available...how much is it for the trackday?

Hi just a random question: How much would a R34 Gtt cost when it was brand new, fun facts from guys cars here at work VQ stateman $45000 new VW BORA $40000 Datsun 1600 $2500 new just some fun facts...

...as you could tell work is not very busy lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
    • Did you even watch the video? Its not a steering wheel. 
×
×
  • Create New...