Jump to content
SAU Community

Recommended Posts

i dont think he f**ked anything else, just the radiator.

Jarad, An over pressurised cooling system is a sign of head gasket failure. pressurised combustion gasses etc getting into the cooling system.

Edited by wedge_r34gtr

ah right, i thought he meant 22 psi through the turbos? like he was running full boost and it f**ked up?

hah i must of missed that :P

Yeah i'm guessing he did, but radiator's don't blow themselves up!!!! plus the combustion pressure will be alot higher then 22psi.

no way 30! if it has done the HG, its only done it because its made the head studsa little longer.... New HG, ARP fittings, strap it down again and enjoy.

might have just been a brittle old top tank. I've had one crack before.

Yeah I've had a tank crack but never blow apart

But agree with the studs comment

How did it get that much pressure in there?

H/G?

no way 30! if it has done the HG, its only done it because its made the head studsa little longer.... New HG, ARP fittings, strap it down again and enjoy.

might have just been a brittle old top tank. I've had one crack before.

Yeah its possible, very hot day and pushed it hard..... But will get another Radiator and test it before i worry too much.

And ill be staying stock NEO, they are a tough bit of gear.... Mines been limiter bashed, leaned out and cooked and it keeps making healthy power even with 145k's but if the HG is gone then i certainly cant get upset as it was pushed pretty damn hard for a factory part lol

Jarad, An over pressurised cooling system is a sign of head gasket failure. pressurised combustion gasses etc getting into the cooling system.

Sure is.... But not to say that was the issue yet ;)

or it's because he had a cheap china radiator in it.

they have been know to fail.

but it looks like it was stock. :/

Stock radiator man! Temps were fine on the dyno even on a 42 degree day...... There is another issue and it could be HG or stuck thermostat etc etc

stop sulking tee tee and tell us what happened!!!

LOL no sulking, Coz Racecar..... Cruising along, Haltech drops into protection mode to make me stop, temp gauge is spot on..... Stopped and temp guage started climbing fast..... Pulled over and lifted bonnet then 5-10 seconds later once the pressure built up and the cooling sys super heated the tank split and made my engine bay nice and white..... So the tank only let go once it pressurised which is a good sign BUT it didnt loose much coolant which is the confusing part as to why it ran hot all of a sudden, the Haltech picked up the temp rise and dropped into limp mode to protect the car, the stock guage is usless and still said everything was good lol

vrroooGAAATTTTTTEEEEEEEE ...................sploosh.

Nope the Gaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaate was that morning, i was just light cruise when the issue occured

well it's 40deg and i've just spent the the last 2 hours "walking the belts" (lots of steps and steep inclines) at work

I'm stuffed :turned: ...need to get fit

10min break then i'm back out there again :domokun:

Edited by wedge_r34gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
×
×
  • Create New...