Jump to content
SAU Community

Recommended Posts

Nah nothing's up man

Put go kart together

Hillclimb

New axle and springs in boat trailer so it will make the trip north at Xmas

Fit radio and whatever else I need to boat to make it sea worthy

Xmas parties

Track day for go kart at Wakefield

Fix axle seal in Melisa's car

Fix skyline and service

And want to try and get house painted as well

Just a few things to do

pretty quick!

benji theres a socket you can get that makes that a 2 minute job. a socket with a cut up it so the wire doesnt get tangled

yes used that socket but ABS booster is in the road and the heat shield for the manifold. Had to use a hole heap of extensions and joints lolz.

ended up having to take off my strut brace to screw new one in (I hand screwed it in as didn't want to risk cross-threading).

I will keep an eye on any beers (if its an open invite :) )

My car is off to Nathan @ Newcastle Dyno tomorrow for a tune and boost controller! Not expecting numbers much different than standard but hoping to get a mid range improvement.

Have you got adjustable cam gears? they beef up the midrange quite alot, they did for mine anyways.

Only mods are -7's, xforce dumps (I was told this is helpful when changing turbos), upgraded fuel pump and splitfire coilpacks (prob don't count as a mod).

It doesn't feel as responsive since the turbo changes and I am concerned about running these with standard ECU and boost control. The only reason I have made any changes was due to the possible failure of the ceramic turbos and everything else has kind of flowed on.

It is getting a PFC and Greddy profec-b tomorrow.

After this I plan on keeping it as stock as possible, well for a while at least :)

Edited boost control reference

Edited by djrobertshaw

haha yeah, probably should have explained that.............I know the standard boost solenoid does its job, but keen on running a low boost and hi boost with appropriate tune.

I may have been misled but a few people have said running -7's can see boost spikes with standard ECU and solenoid.............and its a neat excuse for the wife anyways!

The only things i would have added to that list is injectors and cam gears, the cam gears should improve response (only if its tuned properly aswell etc)... with the above you should be able to get 300+ kw at all 4 i would think...

your injectors (if there stok) will probably limit you to around 260ish and stop you from making best use out of the nice turbos you now have :)

hope that helps, although sounds like it may be a little bit late if its going in tomorrow.

Thanks for the advice.

I did consider making more changes but budget and trying to figure out what my plan is means that a couple of small changes now and then probably wait for the inevitable bang before doing more.

On a side note I am looking to change the color of the BBS LM rims, do you guys have an experience with anyone locally? I may just do it myself but if there is someone good then lazyness will prevail.

Nathan does great work

Rims are something you can do yourself but would be better left to the pros

Paint is one thing you get what you pay for and if the finish isn't spot on it will detract from the rest of the car

I can pay t but it is a 1-2 metre finish

That is it looks great till you get that close then you can see the minor blemishes

Is okay for racecar but not my car

Find the best painter you can afford wether it be a panel shop or bike repair/custom shop and get some quotes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...