Jump to content
SAU Community

It has begun

clarkey

By clarkey,
in Victoria

 Share

Recommended Posts

clarkey Proficient

clarkey

Posted
Posted

I've had my 33 for about 18 months now and have read everybodys posts (with envy) when they have bought their mods etc.. Now its my turn.

I had a Nismo cluster and centre gauges put in last week. I ordered a Power FC through Japanese Import Parts which should be hear soon and ordered a set of Volk TE37's from Dave which will take a bit longer but well worth the wait.

I may even get some cam gears installed depending on finances.

Waiting is a pain in the arse.

Alan

Link to comment
https://www.sau.com.au/forums/topic/40303-it-has-begun/
Share on other sites
adznight Newbie

adznight

Posted
Posted

Yes, I like to think that James.

What it means is the distance from the inside of the wheel where it touches the hub to the inside of the rim at it's furthest point (I'm pretty sure). You'll notice the difference between mine and Andrews. His look a lot more deep where as mine dont as the offset is a higher value. It's so they dont hit the calipers and fit under the wheel arch correctly. If you used the same ofset on a GTT as a GTR they'd hang out the arch's.

[:)

Link to comment
https://www.sau.com.au/forums/topic/40303-it-has-begun/#findComment-827327
Share on other sites
dAVE Grand Master

dAVE

Posted
Posted

Alan,

Where did you pick up the nismo dash from? not that it matters now but I can get pretty good price on them new now..

Also, can I suggest if your going to get cam gears, do it before you tune the pfc.. otherwise you'll keep spending money on tunes everytime you put something on which can become costly.

Link to comment
https://www.sau.com.au/forums/topic/40303-it-has-begun/#findComment-827416
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...