Jump to content
SAU Community

R34 Op6 Stock Turboy, Jjr Front/dump Pipe, Intake, Cooler, Suspensions

Bratva
 Share

Recommended Posts

Bratva Community Regular

Bratva

Posted
Posted

Hello,

This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it.

R34 OP6 Stock Turbo 350$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost.

R34 GTT Coupe JJR Front+Pipe pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor

R34 GTT stock intercooler 20$ pickup or 30$ + Delivery

R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each

R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to prevent reversion. $120

Buy or make offer if interested in these parts, buy with your tax return funds ;)

post-64185-0-80392400-1340353448_thumb.png

post-64185-0-60541700-1340353456_thumb.png

post-64185-0-70557600-1340353467_thumb.png

post-64185-0-93517900-1340353476_thumb.png

post-64185-0-82298200-1340353483_thumb.png

post-64185-0-95103300-1340353490_thumb.png

  • 2 weeks later...
Bratva Community Regular

Bratva

Posted
  • Author
Posted
Hello, This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it. R34 OP6 Stock Turbo 300$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost. R34 GTT Coupe JJR Front+Dump pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor R34 GTT stock intercooler 20$ pickup or 30$ + Delivery R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to prevent reversion. $110 Buy or make offer if interested in these parts, buy with your tax return funds ;)
  • 2 weeks later...
Bratva Community Regular

Bratva

Posted
  • Author
Posted

Hello,

This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it.

R34 OP6 Stock Turbo 350$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost. SOLD

R34 GTT Coupe JJR Dump+Front pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor Selling 130$ (same price with or without O2 sensor), perfect condition minus very thin scratch

R34 GTT stock intercooler 20$ pickup or 30$ + Delivery

R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each 75$ for both!

R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to

prevent reversion. $120 110$, can include the rubber hoses which i had going to my stock bov + the breather pipe

6x Stock R34 Injectors with o rings 25$

Buy or make offer if interested in these parts, buy with your tax return funds ;)

Bratva Community Regular

Bratva

Posted
  • Author
Posted

Hello,

This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it.

R34 OP6 Stock Turbo 350$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost. SOLD

R34 GTT Coupe JJR Dump+Front pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor Selling 130$ (same price with or without O2 sensor), perfect condition minus very thin scratch

R34 GTT stock intercooler 20$ pickup or 30$ + Delivery

R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each 75$ for both!

R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to

prevent reversion. $120 110$, can include the rubber hoses which i had going to my stock bov + the breather pipe

6x Stock R34 Injectors with o rings 25$

Stuff not crossed out is for sale still ;)

  • 2 weeks later...
Bratva Community Regular

Bratva

Posted
  • Author
Posted

Hey good to hear did it come in tact and O2 sensor in there ? I didnt have too much bubblewrap to wrap it nicely.

He didn't let me send it at first, said that it had to be <1.05metres, so i came back with a tapemeasure and showed him that it was about 1.02metres ;)

Bratva Community Regular

Bratva

Posted
  • Author
Posted

Hello,

This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it.

R34 OP6 Stock Turbo 350$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost. SOLD

R34 GTT Coupe JJR Dump+Front pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor Selling 130$ (same price with or without O2 sensor), perfect condition minus very thin scratch

R34 GTT stock intercooler 20$ pickup or 30$ + Delivery

R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each 75$ for both!

R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to

prevent reversion. $120 110$, can include the rubber hoses which i had going to my stock bov + the breather pipe

6x Stock R34 Injectors with o rings 25$

Stuff not crossed out is for sale still ;)

Intake pipe + springs left! come at them please

RSFOURDayz Experienced

RSFOURDayz

Posted
Posted

Hey good to hear did it come in tact and O2 sensor in there ? I didnt have too much bubblewrap to wrap it nicely.

He didn't let me send it at first, said that it had to be <1.05metres, so i came back with a tapemeasure and showed him that it was about 1.02metres ;)

Haha nice one.. Yeah O2 sensor was still there. Thanks again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...