Jump to content
SAU Community

Recommended Posts

Hello,

This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it.

R34 OP6 Stock Turbo 350$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost.

R34 GTT Coupe JJR Front+Pipe pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor

R34 GTT stock intercooler 20$ pickup or 30$ + Delivery

R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each

R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to prevent reversion. $120

Buy or make offer if interested in these parts, buy with your tax return funds ;)

post-64185-0-80392400-1340353448_thumb.png

post-64185-0-60541700-1340353456_thumb.png

post-64185-0-70557600-1340353467_thumb.png

post-64185-0-93517900-1340353476_thumb.png

post-64185-0-82298200-1340353483_thumb.png

post-64185-0-95103300-1340353490_thumb.png

  • 2 weeks later...
Hello, This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it. R34 OP6 Stock Turbo 300$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost. R34 GTT Coupe JJR Front+Dump pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor R34 GTT stock intercooler 20$ pickup or 30$ + Delivery R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to prevent reversion. $110 Buy or make offer if interested in these parts, buy with your tax return funds ;)
  • 2 weeks later...

Hello,

This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it.

R34 OP6 Stock Turbo 350$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost. SOLD

R34 GTT Coupe JJR Dump+Front pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor Selling 130$ (same price with or without O2 sensor), perfect condition minus very thin scratch

R34 GTT stock intercooler 20$ pickup or 30$ + Delivery

R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each 75$ for both!

R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to

prevent reversion. $120 110$, can include the rubber hoses which i had going to my stock bov + the breather pipe

6x Stock R34 Injectors with o rings 25$

Buy or make offer if interested in these parts, buy with your tax return funds ;)

Hello,

This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it.

R34 OP6 Stock Turbo 350$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost. SOLD

R34 GTT Coupe JJR Dump+Front pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor Selling 130$ (same price with or without O2 sensor), perfect condition minus very thin scratch

R34 GTT stock intercooler 20$ pickup or 30$ + Delivery

R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each 75$ for both!

R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to

prevent reversion. $120 110$, can include the rubber hoses which i had going to my stock bov + the breather pipe

6x Stock R34 Injectors with o rings 25$

Stuff not crossed out is for sale still ;)

  • 2 weeks later...

Hey good to hear did it come in tact and O2 sensor in there ? I didnt have too much bubblewrap to wrap it nicely.

He didn't let me send it at first, said that it had to be <1.05metres, so i came back with a tapemeasure and showed him that it was about 1.02metres ;)

Hello,

This is coming from a <100,000kms R34 GTT Coupe. Has been completely stock never had a boost controller in it.

R34 OP6 Stock Turbo 350$ minimal shaft play i assume (feels same as my 3076 shaftplay) always run on stock boost, no weird sounds and made full boost. SOLD

R34 GTT Coupe JJR Dump+Front pipe combo made in stainless steel. 140$, 1 thin scratch on the bottom, comes with perfectly working O2 sensor Selling 130$ (same price with or without O2 sensor), perfect condition minus very thin scratch

R34 GTT stock intercooler 20$ pickup or 30$ + Delivery

R34 GTT Rear shocks stock no knocks leaks still have full erection stiffness in them 50$ each 75$ for both!

R34/R33 Intake pipe from autobahns 3" AFM side and stock turbo side, i had this on my R34 GTT with apexi pod filter and it fit (just). Has a well ly welded in BOV return pipe angled away from the AFM as the stock pipe design is straight down thus this is to

prevent reversion. $120 110$, can include the rubber hoses which i had going to my stock bov + the breather pipe

6x Stock R34 Injectors with o rings 25$

Stuff not crossed out is for sale still ;)

Intake pipe + springs left! come at them please

Hey good to hear did it come in tact and O2 sensor in there ? I didnt have too much bubblewrap to wrap it nicely.

He didn't let me send it at first, said that it had to be <1.05metres, so i came back with a tapemeasure and showed him that it was about 1.02metres ;)

Haha nice one.. Yeah O2 sensor was still there. Thanks again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...