Jump to content
SAU Community

R33 Gtr - Wheel Offsets

Adz2332
 Share

Recommended Posts

Adz2332 Grand Master

Adz2332

Posted
Posted

Hey all,

I had a midnight purple r33 Gtr and had a set of work xd9s 18x10 +18 and they looked great. Almost sat flush etc good dish.

Well now a bought another Gtr r33 and I bought exactly the same rims but in black. Same offsets etc and they sit no where near flush! Sits an inch inside the front arches!? I'm not sure what's happened!!??

This one runs k sport coilovers as the only difference in suspension set up. My old one had standard but lowered springs..

Help?? :/

Pics uploaded soon

Link to comment
https://www.sau.com.au/forums/topic/403217-r33-gtr-wheel-offsets/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Sold the car.

I was running Wedsport SA90s 18x10.5 +15 - now they sat well with 285s.

But good luck ever finding a set for sale ( and cheaply), one of the rarest rim/size around for a GTR IMO. Took 9 months to find a set and they wern't cheap as... I only know of one other in the country - I had regular offers on the wheels haha :)

Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted

Ive just looked up and my last set was definatly 18x10 +18.

The car is going into a suspension place today to see if its running alot of camber... even tho the the naked eye it doesnt look like it is.... fingers crossed

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      R35 GT-R production ends after 18 years

      By Rezz · Posted

      Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Kapr
      ECU sees many times the speed than speedo does (R34 swap)

      By Kapr · Posted

      Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...