Jump to content
SAU Community

Fs: R33Gtst 200Rwkw 97,000Kms Act

reaper1721
 Share

Recommended Posts

reaper1721 Collaborator

reaper1721

Posted
Posted

For sale is my R33 gtst S2 1996 97,000kms

Mods/work done is as follows:

Gates racing timing belt and tensioners done <10,000kms

Drive belts replaced <10,000kms

Water pump replaced <10,000kms

HKS Fcon Vpro piggy back ecu. tuned to 210rwkw on 14psi. Currently running 11psi making 195rwkw. Have dyno sheets to prove. Tune is MAP based instead of AFM.

Blitz dual solenoid boost controller with incar digital control.

HKS front mount intercooler.

Full 3 inch custom turbo back exhaust with shotgun/blast style pipes at the rear. The exhaust is not rediculously loud however the car can come with either/both a 3.5 inch cat back and i also have a stock system if rego concerns you.

Airbags and ABS for those safety conscious people.

Ohlins adjustble shocks and springs front and rear. Legal height.

Factory rear strut brace.

No name front strut brace.

Large (commodore size) battery fitted.

Clarion head deck with rear usb

6 inch front and 6.5 inch rear kevlar splits.

Comes with moulded sub box to suit the right side of the boot, i can probably throw a sub in too, no amp at this stage though.

sub/amp wiring has been run to the boot.

2 Gauges below the cd player on an allot face plate. One digital volts gauge and an analog VDO boost gauge. Both gauges light up blue to match the cd player.

18x8 front and 18x9 rear wheels. Starcorp mesh.

Front tyres are Maxxis MA-V1 235/40 with good tread aside from some inside edge wear.

Rear tyres are Federal 595SS 265/35 with good tread.

Factory floor mats front and rear.

Interior is in great condition, only let down is the usual drivers seat tear, however it is still very small.

Factory wind deflectors over the door windows.

Short shifter

New leather handbrake and gear boots bought last year (group buy)

The bodykit is very tame with an N1 look-a-like front bar and matching side skirts and rear bar.

Comes with a HICAS lock bar but has not been fitted yet.

Comes with NISMO side indicators which have not been fitted yet.

Always serviced every 5,000kms with top quality german fully synthetic oils (Fuchs brand)

PBR dot 5.1 brake fluid.

I have never had this car on the track, much as i would have liked to. The previous owner did not seem the type either. (he was in the navy and barely got a chance to drive it. He did 5,000kms in 3 years.)

My name is Jono and you can contact me on Zero 415 055 80Nine

Asking $9k ono

The car is located in ACT.

skyline.jpg

skyline2.jpg

skyline3.jpg

If you want more photos feel free to ask.

Link to comment
https://www.sau.com.au/forums/topic/403219-fs-r33gtst-200rwkw-97000kms-act/
Share on other sites
reaper1721 Collaborator

reaper1721

Posted
  • Author
Posted

how much does it cost to transfer the car from ACT to vic??

Do you mean to transport, or rego costs?

If you mean transport, a flatbed would be about $1200.

Shipping via a larger car carrying company or major shipping company might be cheaper.

reaper1721 Collaborator

reaper1721

Posted
  • Author
Posted

More photos of interior and engine as requested

20120624_165611.jpg

20120624_165642.jpg

20120624_165627.jpg

20120624_165719.jpg

20120624_165739.jpg

20120624_165728.jpg

20120624_165756.jpg

20120624_165802.jpg

Second last pic is of the MAP sensor. The AFM is not connected, it is just there for appearances. It will be fitted with a Mushroom filter at the time of sale.

I have also included a pic of the compliance plate for anyone who wants to do a revs check. Rego plate is YGR99C

It will also have a gearknob at the time of sale.

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...