Jump to content
SAU Community

Going To Single Turbo On My Gtr,need Help!

Offtap33
 Share

Recommended Posts

Offtap33 Enthusiast

Offtap33

Posted
Posted

Hey all hope use could help me with a few questions I have a 33 v spec I just took the motor out as doing some work and new shell ect, any way I was thinking of going single turbo just wondering what ya thoughts where? Is it worth it

But I main question is what sort of things do I have to change to go single? And what turbo do youse recommend my current mods are engine:

* low km reconditioned head

* HKS 272 cams

*CP forged pistons

* argo conrods

* balanced crank

* ACL race bearings

*Nitto oil pump

*new water pump

* sump baffle

* splitfire coils

* R34 N1 turbos

* stainless dumps

* 3"exhaust with HKS muffler

* metalcat

* walbro 500hp fuel pump

*700cc denso injectors

*adjustable fuel reg

*Z32 a/f meters

*apexi pods

*alloy radiator

*power fc

*greddy profec b ebc

*oil catch can

Drivetrain:

* Jim Berry carbonic race clutch

* nismo flywheel

*nismo slave cylinder

*cusco front diff

Let me know what you guys think:)

Weapon Mentor

Weapon

Posted
Posted

Depends what power you want really, I've had two RB26 set ups essentially and the one I have in my GTR now is the best I've had (the stock unopened motor is holding it back alot however) I have had 3 single turbo set ups on my GTR to date.

I'm currently running a Precision Billet series PT6262 turbo charger, un real response full 1.6 bar by 4200rpm on 98RON however with a built motor my peak power would be a lot better. Previous set ups have included a Garrett GT3582R and a Turbonetics T66 (plain bearing 0.90 roughly housing) I've never liked the poswer delivery of twins however they may have their advantages in the 3-360kw range. However I have no complaints since changing to a single high mount plus the maintenance is a hell of a lot easier :)

  • 3 weeks later...
Offtap33 Enthusiast

Offtap33

Posted
  • Author
Posted

Awesome thanks mate :) is it a lot of stuffing around to go to single? Sounds like you have some awesome setups!!

What do you have to change to go single? Do you still get aircon ect. I was reading that some people change a heap of stuff I'm not gonna go to big just something that looks nice and is resposive

wedge_r34gtr Mentor

wedge_r34gtr

Posted
Posted

if your arfter a bit more kick, why not just get some -5's? you have good supporting modes in place and they will just bolt up to your current setup. would be a cheaper option then going single.

single would require new intake piping, exhaust manifold, dumps and front pipe etc.

If your keen on the single route, i see alot of people getting good results with a t04z

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

Depends what power you want really, I've had two RB26 set ups essentially and the one I have in my GTR now is the best I've had (the stock unopened motor is holding it back alot however) I have had 3 single turbo set ups on my GTR to date.

I'm currently running a Precision Billet series PT6262 turbo charger, un real response full 1.6 bar by 4200rpm on 98RON however with a built motor my peak power would be a lot better. Previous set ups have included a Garrett GT3582R and a Turbonetics T66 (plain bearing 0.90 roughly housing) I've never liked the poswer delivery of twins however they may have their advantages in the 3-360kw range. However I have no complaints since changing to a single high mount plus the maintenance is a hell of a lot easier :)

What power are u making with 6262? What boost

Weapon Mentor

Weapon

Posted
Posted

Well it made 320kw on around 20psi which I'm

Not happy with however it may have something to do with the only mildly decent tuner up this way tuned it to around 10.8:1 afr's lol so it would make 350 or so leaned up a bit... However I was also after a bit of life from the stock motor to so I'm not complaining.

Going to a single was the best thing I ever did for my GTR, in terms of changing things that's par for te course however it's definitely worth it.

My GTR is currently getting parted out.... So my turbo set up is for sale complete with hot side piping, dump and front pipe to suit 32/33 GTR and intake pipe lol

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

eXquiSit Mentor

eXquiSit

Posted
Posted

was this neo built or stock?

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

zebra Grand Master

zebra

Posted
Posted

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

Jez

Wait....I'll send you a pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...