Jump to content
SAU Community

Recommended Posts

hi im doin a RB 25/30 specs include :

spool RB30DET (DOHC) Rebuild Kit CP 9:1 , RB head oil drain kit, Camtech 268/272 cams , RB25det head , RB20 covers, oil pump spool, crank collar, turbo manifold 6booost,

RB26dett plenum, HTA GT3586R turbo , water pump N1, R34 RB25det 5 speed gearbox

some pics :

RB30 as i got it

301807_10150785934155974_1967304187_n.jpg

RB25det head as i got it

467552_10150585369340974_1778638164_o.jpg

RB25det head sittin on the RB30 block with the RB20 covers and with a modiffied KKK turbo just for looks!

544993_10150851561440974_1152166161_n.jpg

will add more pics as i go

CHEERS Oscar

Edited by MRHD66
Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

How is the rb26 plenum going onto the rb25 head? Pretty sure they aren't compatible without a shite tonne of modifications.

Also, you should have put this in the build section!

power tune do a manifold adapter kit that I will be using
Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423063
Share on other sites

how so mate

The water galleries are offset from one another so the plates need to mismatch to create an angle. You cannot use a gasket in between the two halves as it will block the outer one

They may be ok but from personal experience they are a complete f**k around to seal properly. Most people just use a tonne of silicon but that can block the water gallery and present its own problems

They may have changed the design since I saw the last one though so put up some pics once you get it

Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423240
Share on other sites

how much f#cking around Is gettin VCT to work on a RB26 head

For me.....none at all.

I'm not suggesting you go RB26 head but there are no gains by going RB26 plenum and throttles. In fact, your tuner is going to have an extremely hard time making it run nicely. You have essentially lengthened the intake runner by another inch or more which creates all kinds of problems with air bouncing back from the valve head and transient throttle at lower revs.

You are definitely better off with a Greddy or similar.

Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423271
Share on other sites

For me.....none at all.

I'm not suggesting you go RB26 head but there are no gains by going RB26 plenum and throttles. In fact, your tuner is going to have an extremely hard time making it run nicely. You have essentially lengthened the intake runner by another inch or more which creates all kinds of problems with air bouncing back from the valve head and transient throttle at lower revs.

You are definitely better off with a Greddy or similar.

how much it cost to make RB26vct and do u use a RB25neo intake cam? I know it's not just cam too Edited by MRHD66
Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423277
Share on other sites

how much it cost to make RB26vct and do u use a RB25neo intake cam? I know it's not just cam too

It's about $2500 with the head off.

No we designed our own custom camshafts. It's also important to consider valve clearance so not something I would recommend attempting at home

Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423279
Share on other sites

It's about $2500 with the head off.

No we designed our own custom camshafts. It's also important to consider valve clearance so not something I would recommend attempting at home

yeh mate I will get all that done when I get the VCT oil feed welded up
Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...