Jump to content
SAU Community

Recommended Posts

As topic state, have a set of 4 Federal 595 RS-R's for sale. Sizes are:

235/40/r18

255/35/r18

All 4 have over 5mm of tread left and barely any camber wear.

Bought them for $1000 at the end of last year. Yours for $500.

post-67844-0-36495800-1341027127_thumb.jpg

Also have a set of Volk F-Zero Challenge 18" wheels. Specs are as follows:

18X10.0 +48

18X9.0 +45

(These seem to be more for a toyota fitment, but can fit an r33 GTS-T with spacers.)

Structurely fine, cosmetically shagged. See below for pictures

post-67844-0-16215100-1341027518_thumb.jpg

Wheel 1

post-67844-0-19686700-1341027538_thumb.jpg

Wheel 2

post-67844-0-94063600-1341027553_thumb.jpg

Wheel 3

post-67844-0-94378900-1341027570_thumb.jpg

Wheel 4

post-67844-0-74803400-1341027584_thumb.jpg

post-67844-0-77549600-1341027595_thumb.jpg

post-67844-0-73546100-1341027602_thumb.jpg

Will let them go for $350, thats under $100 a wheel for genuine Volk wheels!

Also, if you take both the tyres and rims as a package i'll do the lot for $650.

Lastly, Some leftovers from my r33, Including R33 GTST S1 front seats, in good condition, some intercooler piping and brackets, and some floor mats.

post-67844-0-77877500-1341027682_thumb.jpg

post-67844-0-44519200-1341027693_thumb.jpg

post-67844-0-25662700-1341027702_thumb.jpg

All of this is free, providing you come and pick it up yourself.

I live in the eastern suburbs of melbourne, you can contact me, Andrew, on 043414584. Any questions just ask.

(I dont really have time to organise packaging or a courier for sending the wheels interestate, so would prefer pick up only. Cheers!)

Oops sorry number is 0434145894, unfortunately the rims are now gone along with the floor mats. I will split the tyres though. Im in lilydale if you wanna pick up the spare any time after 5 weekdays

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...