Jump to content
SAU Community

Recommended Posts

Hey Guys, this is my first thread on here, hopefully some of you find it useful.

I have been searching and trying to work out what each car will come with in the auctions is a headache. Asking an importer to look at 4 cars a day to find out they arent a premium isnt fair, so i decided to work it out for myself.

What you need to do is find the car up for auction on this site: http://jpcenter.ru/

Once you found the car, click on the "MONTH OF PRODUCTION" button

Type the cars Japanese VIN in there, for a v35 Coupe it will be CPV35-XXXXXX where the X's will be a number on your auction sheet.

From there you need the "code of a model"

The one im doing for this test looks like this - GLJARVNV35EDAA-C--

The first lot of numbers in the code are unimportant, you know what they represent by looking at the car

The important numbers/letters start from the number 7.

7 = Your transmission type, where N is 5 speed auto, i think manual will probably be M

After that nothings important until 14, where 14,15,16,17,18 represent what factory option packs you have :)

Please note i only had access to the sedan one and i dont speak japanese well so there could very well be mistakes or options missing

14 is concerned with what external options you have

The possible options are

GLSSW = Privacy Glass

COAT2 = "Bok Doko - eight off seven in a superuser" (WTF does this mean?)

DWHLV = 17 215/55 wheels/tyres

ROOF3 = Garasusanru electric step (sunroof?)

Option 15 is to do with navigation

- = Regular

(A) TELv2 - Tv Navigation DVD (shiki?)

(B) ETCS2 - ETC + TV Navigation Formula DVD

©TELV4 - Navigation with CD

Option 16 is to do with the CD player

CLAS2 = BOSE plus dual zone climate control (Premium pack?)

CLAS3 = ??? with BOSE

CLAS4 = ??? with BOSE

CLAS5 = ??? without BOSE

CLAS6 = ??? without BOSE

STDv4 = Leather Fronts

BLTT5 = 3 point type seatbelt, Power drivers seat?

SPI3 = one rear wiper frame a rear spoiler and opening

SPI2 = Rear spoiler and a link frame □ Assignable

Option 17 is to do with performance options

ACCS3 = Adaptive Cruise Control system

VDCs2 = VDC

DIFF6 = LSD

I will post up an image soon so you can reference what yours will have :) Happy shopping!

Link to comment
https://www.sau.com.au/forums/topic/404005-option-codes/
Share on other sites

Some further translations:

Clas3 - P collection with BOSE

Clas4 - S collection with BOSE

Clas5 - P collection without BOSE

Clas6 - S collection without BOSE

STDV4 - Leather Seat with Heating Front Only

BLTT5 - 3 seatbelt rear with curtain airbag and active head restraint

SPOI3 - Rear spoiler with side skirts and rear wiper

SPOI2 0 Rear spoiler with side skirts

I have no idea what the difference is between a P collection and a S collection. Presumably P means Premium and S means Sports. Looks like Nissan had the "S" and "P" designations for the V35 as well (as is the case with the V36).

Link to comment
https://www.sau.com.au/forums/topic/404005-option-codes/#findComment-6430221
Share on other sites

  • 8 months later...

Sorry to trawl this thread up from the past, I have been using your codes to browse and I can say they aren't accurate for sedans past 03 (believe me I just bought an '03 with a D code Option 16 and it doesn't have side airbags, it has the heated seats with full leather option, but i already knew that before buying it). I did however find a better way by accident today, it is quicker and it doesn't require translation:

go here

http://nissan.epc-data.com/

type in the japanese VIN in the section that says: "Please enter full frame number:"

you will then get to a page like this: (here is one i prepared earlier with alot of options)

http://nissan.epc-data.com/skyline/hv35/6820-vq30dd/?frame_no=hv35-204441

if you look at the "Spec code" section it will give you the option code (similar to those in the original post) if you hover over it, it will give you a tooltip with an explanation of which code is which IN ENGLISH.

Enjoy! and I assume this does more than just V35s!

Link to comment
https://www.sau.com.au/forums/topic/404005-option-codes/#findComment-6787411
Share on other sites

This webpage - http://nissan.epc-data.com/skyline/v35/6815-vq25dd/body/680/68520/ suggests that it is either 250GTM Navi Edition or 350GT Premium Leather Package (as opposed to CLAS8 which is Premium Spec).

I found another page that says it's navi edition for a Stagea NM35, so that ties in with the above. Do you have factory nav?

Link to comment
https://www.sau.com.au/forums/topic/404005-option-codes/#findComment-6788512
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is for an RB20DET. Sorry for not including that. 
    • Welp, this is where my compression lands after my rebuild. Thoughts? I have ~6 hours on the motor. 
    • Well, after the full circus this week (new gearbag, 14 psi actuator on, injectors and AFM upgraded, and.....turbo repair) the diagnosis on the wastegate is in. It was broken. It was broken in a really strange way. The weld that holds the lever arm onto the wastegate flapper shaft broke. Broke completely, but broke in such a way that it could go back together in the "correct" position, or it could rearrange itself somewhere else along the fracture plane and sit with the flapper not parallel to the lever. So, who knows how and when exactly what happened? No-one will ever know. Was it broken like this the first time it spat the circlip and wedged itself deep into the dump? Or was it only broken when I tried to pry it back into place? (I didn't try that hard, but who knows?). Or did it break first? Or did it break between the first and second event of wierdness? Meh. It doesn't matter now. It is welded back together. And it is now held closed by a 14 psi actuator, so...the car has been tuned with the supporting mods (and the order of operations there is that the supporting mods and dyno needed to be able to be done first before adding boost, because it was pinging on <<14 psi with the new turbo with only a 6 psi actuator). And then tuned up a bit, and with the boost controller turned off throughout that process. So it was only running WG pressure and so only hit about 15-16 psi. The turbo is still ever so slightly lazier than might be preferred - like it is still a bit on the big side for the engine. I haven't tested it on the road properly in any way - just driven it around in traffic for a half hour or so. But it is like chalk and cheese compared to what it was. Between dyno numbers and driving feedback: It makes 100 kW at 3k rpm, which is OK, could be better. That's stock 2JZ territory, or RB20 with G series 550. It actually starts building boost from 2k, which is certainly better than it did recently (with all the WG flapper bullshit). Although it's hard to remember what it was like prior to all that - it certainly seems much, much better. And that makes sense, given the WG was probably starting to blow open at anything above about 3 psi anyway (with the 6 psi actuator). It doesn't really get to "full boost" (say 16 psi) until >>4k rpm. I am hopeful that this is a feature of the lack of boost controller keeping boost pressure off the actuator, because it was turned off for the dyno and off for the drives afterward. There's more to be found here, I'm sure. It made 230 rwkW at not a lot more than 6k and held it to over 7k, so there seems to be plenty of potential to get it up to 250-260rwkW with 18 psi or so, which would be a decent effort, considering the stock sized turbo inlet pipework and AFM, and the return flow cooler. According to Tao, those things should definitely put a bit of a limit on it by that sort of number. I must stress that I have not opened the throttle 100% on the road yet - well, at least not 100% and allowed it to wind all the way up. It'll have to wait until some reasonable opportunity. I'm quite looking forward to that - it feels massively better than it has in a loooong time. It's back to its old self, plus about 20% extra powers over the best it ever did before. I'm going to get the boost controller set up to maximise spool and settle at no more than ~17 psi (for now) and then go back on the dyno to see what we can squeeze out of it. There is other interesting news too. I put together a replacement tube to fit the R35 AFM in the stock location. This is the first time the tuner has worked with one, because anyone else he has tuned for has gone from Z32 territory to aftermarket ECU. No-one has ever wanted to stay Nistuned and do what I've done. Anyway, his feedback is that the R35 AFM is super super super responsive. Tiny little changes in throttle position or load turn up immediately as a cell change on the maps. Way, way more responsive than any of the old skool AFMs. Makes it quite diffifult to tune as you have to stay right on top of that so you don't wander off the cell you wanted to tune. But it certainly seems to help with real world throttle response. That's hard to separate from all the other things that changed, but the "pedal feel" is certainly crisp.
    • I'm a bit confused by this post, so I'll address the bit I understand lol.  Use an air compressor and blow away the guide coat sanding residue. All the better if you have a moisture trap for your compressor. You'd want to do this a few times as you sand the area, you wouldn't for example sand the entire area till you think its perfect and then 'confirm' that is it by blowing away the guide coat residue.  Sand the area, blow away the guide coat residue, inspect the panel, back to sanding... rinse and repeat. 
×
×
  • Create New...